***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Aug 21, 2025 7:56 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
Gregg C
PostPosted: Sat Feb 05, 2011 6:49 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Mar 22, 2009 12:18 pm
Posts: 176
First name: Gregg
Last Name: Cuoco
City: Albuquerque
State: NM
Zip/Postal Code: 87114
Country: USA
Focus: Build
Status: Amateur
Hi Guys,
After watching John's 5 part video, (BTW John, excellent video, thanks !!)
I just fit a dovetail neck to a Dred, I'm quite pleased with the results,
The chalk on the tenons shows approx 95% contact, the cheek seams looks great,
the angle appears to be right on and the neck is dead to nuts straight.
One problem,
Its .050 too deep !!
Is there a painless way to fix this??
I'm thinking a porous fiberglass tape, something that will alow the neck to shim up
and allow glue to permeate the joint.
Am I dreaming ??

Gregg

_________________
Gregg
Top
 Profile  
 
bluescreek
PostPosted: Sat Feb 05, 2011 8:07 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4917
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
Just add a shim to the neck.

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it
Top
 Profile  
 
Gregg C
PostPosted: Sat Feb 05, 2011 8:15 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Mar 22, 2009 12:18 pm
Posts: 176
First name: Gregg
Last Name: Cuoco
City: Albuquerque
State: NM
Zip/Postal Code: 87114
Country: USA
Focus: Build
Status: Amateur
John, I'm gonna need something very thin.
I guess I can make one out of some 1/64 ply.

_________________
Gregg
Top
 Profile  
 
ChuckH
PostPosted: Sat Feb 05, 2011 8:17 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jan 24, 2008 8:01 am
Posts: 1399
Location: Houston, TX
First name: Chuck
Last Name: Hutchison
City: Houston
State: Texas
Country: United States
Focus: Build
Status: Amateur
bluescreek wrote:
Just add a shim to the neck.


Wood shim that is.

_________________
"After forty-nine years of violin building, I have decided that the search for a varnish is similar to the fox hunt. The fun is in the hunt."
Jack Batts Maker and Repairer of Fine Violins
Top
 Profile  
 
jsmith
PostPosted: Sat Feb 05, 2011 8:26 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Jul 15, 2008 8:32 pm
Posts: 321
If I understand your problem correctly, your neck slides in just a hair (.050) too deeply? One solution is to glue a thin shim to the dovetail 'pin', and after it's dry, sand it down till the surface of the neck is flush with the top. I believe you'd have to add so little to the pin that it wouldn't appreciably affect the alignment of the neck's centerline with the centerline of the top. If it would, add equal thickness (or rather thinness) shims to each side of the dovetail pin instead of one shim to one side. I hope that I understood your question, & my answer is clear enough. good luck.

_________________
michael propsom
www.propsomguitars.com
Top
 Profile  
 
Gregg C
PostPosted: Sat Feb 05, 2011 8:35 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Mar 22, 2009 12:18 pm
Posts: 176
First name: Gregg
Last Name: Cuoco
City: Albuquerque
State: NM
Zip/Postal Code: 87114
Country: USA
Focus: Build
Status: Amateur
Mike, yes I will have to add a very thin shim to both sides.

_________________
Gregg
Top
 Profile  
 
jmpbuffalo
PostPosted: Sun Feb 06, 2011 10:03 am 
Offline
Contributing Member
Contributing Member

Joined: Wed Apr 23, 2008 7:16 pm
Posts: 146
A plane shaving is an easy way to get a nice thin shim.

Joe
Top
 Profile  
 
nickton
PostPosted: Mon Feb 07, 2011 5:49 pm 
Offline
Koa
Koa

Joined: Fri Mar 31, 2006 4:54 pm
Posts: 713
Location: United States
First name: nick
Last Name: fullerton
City: Vallejo
State: ca
Zip/Postal Code: 94590
Country: usa
Focus: Build
Status: Amateur
I'd use some of the same wood (mahogany) super glue and shape to fit. No plywood though.

_________________
"Preoccupation with an effect gives it power and enhances the error"
from "Your Owner's Manual" by Burt Hotchkiss.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: doncaparker, Ken Nagy and 22 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com