Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Welp....

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

bcombs510

Post subject: Welp....

Posted: Sun Oct 20, 2019 8:10 pm

Brazilian Rosewood

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3605
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur

This is a first. The bearing fell off while flush trimming the back after glue up. I caught it pretty quickly and the damage is not too bad. I think the binding will cover if I use the typical bwb purf that I like to use.

I guess just a PSA, check them bearings every once in a while?

Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars

These users thanked the author bcombs510 for the post: Pmaj7 (Mon Oct 21, 2019 12:22 am)

Top

Michaeldc

Post subject: Re: Welp....

Posted: Sun Oct 20, 2019 8:17 pm

Koa

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1484
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build

and also set the bit depth only as deep as necessary to get the job done. The bit is cheap ($20) compared to the cost of the wood and the time invested.

These users thanked the author Michaeldc for the post (total 3): dpetrzelka (Mon Oct 21, 2019 12:38 am) • Pmaj7 (Mon Oct 21, 2019 12:23 am) • bcombs510 (Sun Oct 20, 2019 8:27 pm)

Top

James Orr

Post subject: Re: Welp....

Posted: Sun Oct 20, 2019 10:17 pm

Contributing Member

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805

Gulp! I’m equally impressed by your catch!

Sent from my iPhone using Tapatalk

These users thanked the author James Orr for the post: bcombs510 (Mon Oct 21, 2019 7:28 am)

Top

Colin North

Post subject: Re: Welp....

Posted: Mon Oct 21, 2019 7:21 am

Contributing Member

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5498
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro

Because of the number of posts I've seen where this has happened, I'm obsessive about checking it's tight before routing.
And it's great to get another reminder.
Nice catch!

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.

These users thanked the author Colin North for the post: bcombs510 (Mon Oct 21, 2019 7:28 am)

Top

meddlingfool

Post subject: Re: Welp....

Posted: Mon Oct 21, 2019 8:11 am

Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7380
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional

Every
Single
Time

These users thanked the author meddlingfool for the post (total 2): Pmaj7 (Wed Oct 23, 2019 4:04 pm) • bcombs510 (Mon Oct 21, 2019 8:55 am)

Top

doncaparker

Post subject: Re: Welp....

Posted: Mon Oct 21, 2019 9:06 am

Contributing Member

Joined: Tue Dec 17, 2013 10:52 pm
Posts: 3076
First name: Don
Last Name: Parker
City: Charleston
State: West Virginia
Zip/Postal Code: 25314
Country: USA
Focus: Build
Status: Amateur

I have had things loosen on me while the router is on, and I never want that to happen again. I am now fairly obsessive about whether the bit is tight in the collet, whether the bearing is tight on the bit, and whether the height adjustment is locked (or plunging is dialed in right). I'm glad this one didn't turn into a real problem, Brad!

These users thanked the author doncaparker for the post (total 2): Colin North (Mon Oct 21, 2019 1:35 pm) • bcombs510 (Mon Oct 21, 2019 9:07 am)

Top

Ernie Kleinman

Post subject: Re: Welp....

Posted: Tue Oct 22, 2019 8:45 am

Koa

Joined: Sun Oct 28, 2018 3:40 pm
Posts: 500
First name: Ernest
Last Name: Kleinman
City: Guthrie
State: OK
Zip/Postal Code: 73044
Country: United States
Focus: Build
Status: Professional

You might want to use loctite or another adhesive to lock down that router bearing. Its happened to me.

These users thanked the author Ernie Kleinman for the post (total 3): Colin North (Tue Oct 22, 2019 12:50 pm) • Michaeldc (Tue Oct 22, 2019 8:59 am) • bcombs510 (Tue Oct 22, 2019 8:56 am)

Top

Chris Ensor

Post subject: Re: Welp....

Posted: Tue Oct 22, 2019 9:34 am

Contributing Member

Joined: Sat Dec 05, 2009 3:51 pm
Posts: 1203
First name: Chris
Last Name: Ensor
City: Springfield
State: Missouri
Focus: Build
Status: Professional

This is why my Ultimate Binding Jig uses a guide that is mechanically attached. Seen this too many times.

(I use the tool for flushing plates)

_________________
ELEVATE || Next Level Lutherie
http://elevatelutherie.com
&
http://ensorguitars.com

These users thanked the author Chris Ensor for the post: dpetrzelka (Tue Oct 22, 2019 1:27 pm)

Top

Page 1 of 1

[ 8 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 73 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: