When setting up for neck angle jig

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

When setting up for neck angle jig

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

SnowManSnow

Post subject: When setting up for neck angle jig

Posted: Thu Apr 16, 2020 10:50 am

Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707

I’m setting up for another Neck angle jig job. I’ve been using a spacer that is 3.5 mm tall to place at the bridge to set the angle. It’s what I’ve always done. Is that pretty standard? It gives me the 1.5 deg pitch, but I wanted to double check:)

Sent from my iPhone using Tapatalk

Top

James Orr

Post subject: Re: When setting up for neck angle jig

Posted: Thu Apr 16, 2020 4:16 pm

Contributing Member

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805

2.5mm drill bit (or 3/32") will get you .5" to .55" string height at the saddle with a .25" thick fretboard and .04" fret height. [:Y:]

Top

Page 1 of 1

[ 2 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 69 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:

Official Luthiers Forum!

Forum rules

When setting up for neck angle jig

Who is online