Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 28, 2024 9:47 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Jar for Mixed Shellac
PostPosted: Sat Apr 25, 2020 3:37 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon May 26, 2008 2:31 pm
Posts: 259
Location: Conway, Arkansas
Over the years I have used a Ball jar to hold my mixed shellac. It is convenient and has measuring marks on the side.
My problem is when I try to open the jar to use the mixed shellac the lid is stuck like concrete and I have a very difficult time opening the jar back up.
Does everyone else have the same problem? If you don't, please tell me how you store your mixed shellac. My hands will thank you!

_________________
Formerly know as Mandodiddle.


Top
 Profile  
 
PostPosted: Sat Apr 25, 2020 3:39 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Jun 22, 2007 11:14 am
Posts: 1028
Location: Newland, North Carolina
First name: Dave
Last Name: Ball
I use a Ball jar, but I put a piece of wax paper between the lid and the jar when I close it up. Fixed the sticky lid problem for me.

Dave



These users thanked the author ballbanjos for the post: Clay S. (Sat Apr 25, 2020 6:05 pm)
Top
 Profile  
 
PostPosted: Sat Apr 25, 2020 6:16 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968
I have used squeeze bottles and polypropylene bottles for storing shellac for French Polishing.


Top
 Profile  
 
PostPosted: Sat Apr 25, 2020 6:21 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia
Wax paper sounds like a good idea, perhaps even wax alone might work? I have this issue too and always just injected alcohol into the cap and it eventually loosens up. Sometimes I use a pipe wrench to grab it real good too. As for jars, I just use a salsa jar or something like that.


Top
 Profile  
 
PostPosted: Sat Apr 25, 2020 7:44 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jan 22, 2010 9:59 pm
Posts: 3595
First name: Dennis
Last Name: Kincheloe
City: Kansas City
State: MO
Country: USA
Focus: Build
Status: Amateur
Clay S. wrote:
I have used squeeze bottles and polypropylene bottles for storing shellac for French Polishing.

My squeeze bottle has been dried shut for years :P I just squeeze it and dip the tip into the jar to suck some more in there.

I have had jars get dried shut too. They can be reopened by turning upside down and keeping the lid crack wet with alcohol until all the shellac in the threads dissolves. But mainly just avoid getting shellac on the threads to begin with, or wipe it off immediately if you do. And whenever the jar is empty and I'm going to make a new batch, I'll go at the threads with a knife and alcohol to clean off any dried shellac.


Top
 Profile  
 
PostPosted: Sat Apr 25, 2020 7:50 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Dec 17, 2013 10:52 pm
Posts: 3074
First name: Don
Last Name: Parker
City: Charleston
State: West Virginia
Zip/Postal Code: 25314
Country: USA
Focus: Build
Status: Amateur
I prefer snap lid glass jars, with rubber seals. They seal up great, but are not stuck when you open them.

If you keep using screw cap jars, you might want to keep a strap wrench handy.


Top
 Profile  
 
PostPosted: Sun Apr 26, 2020 5:48 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5497
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Been using an old Ponzu (Japanese) sauce bottle. plastic lid on a plastic pourer, glass bottle.
Shellac doesn't stick the plastic at all.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Sun Apr 26, 2020 8:59 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon May 26, 2008 2:31 pm
Posts: 259
Location: Conway, Arkansas
Thanks much for the replies. Several great suggestions that I can file away and use.
Dave, right now I'm going with your wax paper suggestion. It works great and I already have the Ball glass jars.
Again, thanks everybody.

_________________
Formerly know as Mandodiddle.


Top
 Profile  
 
PostPosted: Mon Apr 27, 2020 6:35 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Feb 17, 2013 4:58 pm
Posts: 1449
First name: Ed
Last Name: Minch
City: Chestertown
State: MD
Zip/Postal Code: 21620
Country: United States
Focus: Build
Status: Amateur
What Dennis says for getting the lid off. I have used a plastic squeeze ketchup bottle to mix, store,and use my shellac - same bottle for I bet 25 years. It has a cap that is part of the lid. I mix about 1/3 - 1/2 bottle at a time and it lives on my bench. Almost everything I make out of wood gets a quick wash coat with a paper towel.

Ed


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: jshelton and 66 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com