Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Nov 24, 2024 4:09 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Thu May 06, 2021 3:05 pm 
Offline
Walnut
Walnut

Joined: Wed May 05, 2021 8:47 pm
Posts: 4
First name: Robby
Last Name: Fowler
City: Milledgeville
State: Georgia
Zip/Postal Code: 31061
Country: United States
Focus: Build
Status: Semi-pro
I built a guitar for my buddy that lives 6 hours away so consequently Ive had to keep the guitar for about half a year after its finished. Unfortunately, I put the guitar on a wall mount stand, and it fell off the wall mount stand. When it fell, the side had a huge crack up the whole side. I reglued it and im trying to get it looking like it never happened. I sanded down to the bare wood and repainted most of the side where there was a split. My joint is fine, but the problem is that the wood around the crack is darker in color. I thought that it was because of the wood glue staying on the wood and discoloring the finished, so I resanded it down to the wood and clear coated it again. Same thing happened. I attached a picture. Let me know what is the cause of these darker spots and how I can fix it. Also the white spot is just where I sanded it through on accident, but now it doesn't matter cause Im going to have to redo it anyways to fix the dark spot.Image

https://ibb.co/kXVFytB


Top
 Profile  
 
PostPosted: Thu May 06, 2021 9:08 pm 
Offline
Koa
Koa

Joined: Wed Feb 17, 2016 8:54 am
Posts: 854
State: Texas
Country: United States
Focus: Repair
What kind of finish did you use?


Top
 Profile  
 
PostPosted: Thu May 06, 2021 9:34 pm 
Offline
Walnut
Walnut

Joined: Wed May 05, 2021 8:47 pm
Posts: 4
First name: Robby
Last Name: Fowler
City: Milledgeville
State: Georgia
Zip/Postal Code: 31061
Country: United States
Focus: Build
Status: Semi-pro
DanKirkland wrote:
What kind of finish did you use?

Nitro lacquer from Mohawk


Top
 Profile  
 
PostPosted: Fri May 07, 2021 10:05 am 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 24, 2007 2:45 pm
Posts: 1336
Location: Calgary, Canada
Status: Amateur
No help now but did you use any side bracing?


Top
 Profile  
 
PostPosted: Fri May 07, 2021 10:20 am 
Offline
Walnut
Walnut

Joined: Wed May 05, 2021 8:47 pm
Posts: 4
First name: Robby
Last Name: Fowler
City: Milledgeville
State: Georgia
Zip/Postal Code: 31061
Country: United States
Focus: Build
Status: Semi-pro
Darrel Friesen wrote:
No help now but did you use any side bracing?


No I did not, lesson learned but can't help any of that now.


Top
 Profile  
 
PostPosted: Fri May 07, 2021 3:53 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue May 18, 2010 6:42 pm
Posts: 569
First name: Brian
Last Name: Itzkin
State: NY/Granada
Country: USA/Spain
Focus: Build
Did you adhere the crack with CA glue? If so it may have bled through the wood and stained the surrounding area


Top
 Profile  
 
PostPosted: Fri May 07, 2021 8:54 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia
What glue did you use? If CA then what Brian suggested is most likely it.

If you used something like Titebond then it looks like the crack was not clamped so that the two sections were flush and the glue pooled up.

You probably just have a lot more sanding to do and hopefully the sides are thick enyti take it. You may consider using a card scraper so you can focus on the area better.


Top
 Profile  
 
PostPosted: Sat May 08, 2021 3:42 pm 
Offline
Walnut
Walnut

Joined: Wed May 05, 2021 8:47 pm
Posts: 4
First name: Robby
Last Name: Fowler
City: Milledgeville
State: Georgia
Zip/Postal Code: 31061
Country: United States
Focus: Build
Status: Semi-pro
jfmckenna wrote:
What glue did you use? If CA then what Brian suggested is most likely it.

If you used something like Titebond then it looks like the crack was not clamped so that the two sections were flush and the glue pooled up.

You probably just have a lot more sanding to do and hopefully the sides are thick enyti take it. You may consider using a card scraper so you can focus on the area better.


Used titebond. I did clamp it. I don't remember how well I clamped it, but the joint is nonexistent at some places, so well enough. I don't believe that any glue pooled up, I wiped the glue as I was clamping (which I believe was the culprit) and I didn't see any pooled after I took off the clamp. But I agree with you that a little rough sanding might do the trick


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Colin North and 47 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com