Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Nov 25, 2024 8:30 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Tue Jan 02, 2024 12:42 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jun 02, 2013 8:16 am
Posts: 485
First name: Brian
City: U.P.
State: Michigan
Focus: Build
I'm changing from a 5" Bosch RO to a Festool 5". Of course I bought 10 boxes of 50 discs for the Bosch and the Festool has a larger 8 hole pattern than the Bosch.

Does anyone have any experience or recommendations for punching new holes in discs?

Or an adapter plate to go between the Festool and the different pattern discs?

_________________
Brian R, Wood Mechanic
N8ZED


Top
 Profile  
 
PostPosted: Tue Jan 02, 2024 2:51 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 11, 2013 2:26 pm
Posts: 487
First name: Carl
Last Name: Dickinson
City: Forest Ranch
State: California
Zip/Postal Code: 95942
Country: USA
Focus: Build
Status: Amateur
I went from Bosch to Festool also. I use Mirka Abranet disks with their pad protector and punch additional holes in the protector to match the sander. Seems to work OK. Don't know about solid disks but bet it would work with them too. Try it.



These users thanked the author CarlD for the post: rbuddy (Tue Jan 02, 2024 2:55 pm)
Top
 Profile  
 
PostPosted: Tue Jan 02, 2024 2:59 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat May 17, 2008 1:11 pm
Posts: 2373
Location: Spokane, Washington
First name: Pat
Last Name: Foster
Country: USA
Focus: Build
Brian,

I did the same thing: bought a load of discs for the Bosch, then saw a Festool that I couldn't resist. Doesn't answer your question, but I looked around and couldn't find a good method for punching holes and switched over to Abranet.

_________________
formerly known around here as burbank
_________________

http://www.patfosterguitars.com



These users thanked the author Pat Foster for the post: rbuddy (Tue Jan 02, 2024 3:44 pm)
Top
 Profile  
 
PostPosted: Tue Jan 02, 2024 3:54 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jun 02, 2013 8:16 am
Posts: 485
First name: Brian
City: U.P.
State: Michigan
Focus: Build
Thanks Carl and Pat -

I put a couple "pad protectors" in a cart (Mirka and Festool) and what I'm going to try is cutting slots in the protector to connect the holes and see if that works. Also a "heavy duty" 3/8" hole punch from Amazon to try but punching holes thru abrasives will probably make for a short punch life.

One of the concerns with punching holes is if the process will leave a jagged edge on the hole that might leave swirl marks.

I'll report back with any successes or fails.

Still open to other comments or suggestions if any.

Thanks all!

_________________
Brian R, Wood Mechanic
N8ZED



These users thanked the author rbuddy for the post: Pmaj7 (Wed Jan 03, 2024 11:08 am)
Top
 Profile  
 
PostPosted: Tue Jan 02, 2024 4:38 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7378
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
I kind of went down that road but decided it wasn’t worth the aggravation so I ended up just replacing the sanding discs.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Tue Jan 02, 2024 6:44 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968
Some people make a jig out of a piece of plywood and nails (short thick screws might be better) and use that to punch new holes in the existing sanding discs. The holes are a bit rough and I assume the vacuum pulls the rough edges up into the holes of the pad. Some pad sanders come with a plastic jig for doing this to regular sandpaper.
Another possibility might be to use a plug cutter to drill new holes in a stack of discs using a drill press and drilling through the back side of the discs to minimize the time it is hitting the grit.
The best solution might be to find someone who has a Bosch sander and discount the discs to them - less hassle for you and a deal for them - win/win.


Top
 Profile  
 
PostPosted: Tue Jan 02, 2024 7:12 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 787
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
Fyi the Festool sandpaper is a lot better than the average disks.

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/


Top
 Profile  
 
PostPosted: Tue Jan 02, 2024 9:59 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jun 02, 2013 8:16 am
Posts: 485
First name: Brian
City: U.P.
State: Michigan
Focus: Build
I'm an - 'Adapteur' or sumthing - by nature so can't help it.

I'll keep the Bosch for other uses or give it to a friend with a lifetime of discs anyway.

But I'd like to use some.

What was I thinking buying 10 boxes of 50 discs anyway. Deal too good to be true? Won't do that again ;) Too old for one thing.

That dang Tool OCB, acting up again.

What? Pass up an opportunity to buy tool stuff! Of course I got more discs coming!

Thanks for the suggestions.

I'll post back if punching holes is so easy I could do it.

_________________
Brian R, Wood Mechanic
N8ZED


Top
 Profile  
 
PostPosted: Wed Jan 03, 2024 8:51 am 
Offline
Koa
Koa
User avatar

Joined: Fri Jun 22, 2007 11:14 am
Posts: 1028
Location: Newland, North Carolina
First name: Dave
Last Name: Ball
I did the same thing--I've kept my old discs for use on a velcro hand sanding pad that I use and switched to Abranet for the Festool.

Dave


Top
 Profile  
 
PostPosted: Wed Jan 03, 2024 11:01 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jun 02, 2013 8:16 am
Posts: 485
First name: Brian
City: U.P.
State: Michigan
Focus: Build
Good point Dave I almost forgot I have a 5" dia velcro holder for hand sanding I haven't used in a while. I'll have to put it back in service, there's always hand sanding to do.

_________________
Brian R, Wood Mechanic
N8ZED


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Cal Maier and 40 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com