| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Poly Finish on #15 From Joe White http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=15523 |
Page 1 of 2 |
| Author: | Hesh2 [ Thu Jan 24, 2008 9:33 pm ] |
| Post subject: | Poly Finish on #15 From Joe White |
Well I am just thrilled tonight in as much as I just received pictures from Joe White of my guitar that he has completed finishing with poly. I will have the guitar back here Monday, which will have been exactly 21 days from when I dropped it off at Joe's - amazing turn around. Take a look 
|
|
| Author: | Hesh2 [ Thu Jan 24, 2008 9:34 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
And some more... |
|
| Author: | Hesh2 [ Thu Jan 24, 2008 9:35 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
But wait....  there's more
|
|
| Author: | JJ Donohue [ Thu Jan 24, 2008 9:45 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
Beautiful Hesh!!! Great job Joe!!! Can't wait to see it in person. |
|
| Author: | James W B [ Thu Jan 24, 2008 9:53 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
Hesh that looks great.Do you know if Joe used any pore filler or just a sealer and then shot the poly,as Sir Grumpy does? James |
|
| Author: | Guest [ Thu Jan 24, 2008 10:02 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
James, I can answer this one. I am actually pore filling with WEST System [i]and[i] the poly itself. Sir Grumpy and Sir Rick are at different ends of the filling method and I chose the middle for now. T am trying to keep the film thin but have a proper fill on the pores as well. Both materials work great. |
|
| Author: | Hesh2 [ Thu Jan 24, 2008 10:02 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
I think that he did Skin but he should be along shortly, if he can get in, he was having problems with the new site, to let us know for sure. |
|
| Author: | Dave Anderson [ Thu Jan 24, 2008 10:04 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
It looks like Joe did a great job on your geetar Hesh! Looks mighty fine indeed. 
|
|
| Author: | Guest [ Thu Jan 24, 2008 10:05 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
Well, I posted as a guest above. I hope this one identifies me? Do y'all have to type that verification code at the bottom every time you post? |
|
| Author: | Guest [ Thu Jan 24, 2008 10:15 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
Hello? Is this thing on? It doesn't recognize me?? |
|
| Author: | ChuckH [ Thu Jan 24, 2008 10:20 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
No, you don't have to type that annoying Verification Code each time as a Registered Member. Are you the one what painted that guitar up there? Does Poly mean Polyurethane? |
|
| Author: | Guest [ Thu Jan 24, 2008 10:27 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
Yep, 'twas me. Polyester from McFadden. I'm logged in but it just isn't working for me. Hmmmm |
|
| Author: | KenH [ Thu Jan 24, 2008 10:31 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
Looks mighty fine !!! (in southern language, that means its the top of the pile) Good job Joe! (we know who you are even if the software doesn't) I cant wait to see how my guitars get along with the poly too! |
|
| Author: | James W B [ Thu Jan 24, 2008 10:46 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
Joe you won`t have to use the code when you get registered.Was that West system 3 you were using or something else? SKIN |
|
| Author: | JJ Donohue [ Thu Jan 24, 2008 11:06 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
I just happened to be over at Joe's shop yesterday which was the day after he sprayed the guitars. I was amazed at how hard and how thin the coats were. Joe showed me the tapes which measured around 2 or 3 mils in thickness. Even though the film had not yet been buffed and polished it had a very smooth and clear look. I can only imagine how luscious it looks now in person. I'm in line to have 2 Electrics finished in a few weeks and can't wait to see the results. |
|
| Author: | Hesh2 [ Thu Jan 24, 2008 11:10 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
Hey Joe are you the "guest"? Great job my friend!!!!! Many of us, me included, are having the same issue where the passwords that we have been sent won't let us see any active forums. Brock can fix you up I am sure. Thanks again for the great pics!!!!! |
|
| Author: | WaddyThomson [ Thu Jan 24, 2008 11:19 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
Methinks Joe is incognito, and not by choice. Joe, send Brock an email, and he'll reset your password. Then maybe you can get on. I think you can send it to brock at polingguitars dot com. Oh yeah, I forgot what I was here for. Finish looks really outstanding, Joe and Hesh. *clapping* *clapping* |
|
| Author: | Burton [ Thu Jan 24, 2008 11:22 pm ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
All right! That looks great! I can't wait to get mine too. Joe, it really looks awesome. Burton |
|
| Author: | Anthony Z [ Fri Jan 25, 2008 12:34 am ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
Wow, that looks stunning Hesh! Nice job Joe -- I too can hardly wait to see it in person! |
|
| Author: | Margido [ Fri Jan 25, 2008 4:04 am ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
That does indeed look good. Good job Joe and Hesh2! |
|
| Author: | Hesh2 [ Fri Jan 25, 2008 9:01 am ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
Thanks folks! This guitar will be at a local guitar builder lunch Monday for a number of OLFers to evaluate in person. JJ has already seen it in person. And in a few weeks this guitar will be at Uncle Bob's (Zootman - RC Tonewoods) for another get together and perhaps I can persuade someone into cutting a sound clip then. |
|
| Author: | joe white(old) [ Sat Jan 26, 2008 2:14 am ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
Test Post. |
|
| Author: | joe white(old) [ Sat Jan 26, 2008 2:19 am ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
James W B wrote: Joe you won`t have to use the code when you get registered.Was that West system 3 you were using or something else? SKIN Yes James. West System epoxy, great stuff. It's good to be back on and have the forum recognize me. |
|
| Author: | WaddyThomson [ Sat Jan 26, 2008 9:18 am ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
Welcome Home, Joe. Your finish looks really great. It is nice to be recognized, isn't it, even if it is by a machine. 
|
|
| Author: | LanceK [ Sat Jan 26, 2008 9:23 am ] |
| Post subject: | Re: Poly Finish on #15 From Joe White |
That is smokin hot Hesh! It looks like its been dipped in clear candy! Ill be looking forward to seeing it Monday! |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|