Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
Neck resets in London http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=15609 |
Page 1 of 1 |
Author: | Evan Gluck [ Tue Jan 29, 2008 8:32 pm ] |
Post subject: | Neck resets in London |
One of my clients is moving back to London next week and asked me for a referral to someone in there who will do a neck reset on his Hofner archtop. Any ideas would be most welcome. Best, Evan |
Author: | Tim McKnight [ Tue Jan 29, 2008 8:38 pm ] |
Post subject: | Re: Neck resets in London |
Colin is in the UK but not quite sure where. |
Author: | Dave White [ Wed Jan 30, 2008 2:53 am ] |
Post subject: | Re: Neck resets in London |
Evan, Dave King has a great reputation. His repair workshop is in Denmark Street, London so your client can visit all the guitar shops when they drop it off Details are here. |
Author: | Colin S [ Wed Jan 30, 2008 3:54 am ] |
Post subject: | Re: Neck resets in London |
Yes, another vote here for Dave King. Look no further. Colin |
Author: | Evan Gluck [ Wed Jan 30, 2008 9:47 am ] |
Post subject: | Re: Neck resets in London |
Thanks so much guys, I should have thought of Dave as I have read numerous articles by him. Best, Evan |
Author: | Guest [ Wed Jan 30, 2008 10:25 am ] |
Post subject: | Re: Neck resets in London |
i'm in Manchester UK but I'm reasonably familiar with hofner neck-sets, little too far to come for that alone though possibly! The last one I did had divots in the fingerboard you could plant potatoes in, and a neck that you could throw across a room and watch it come back to you! All came good in the end though after a re-fret etc. I even made some feedback busters for the f-holes so it could be used on stage. Strange neck joint on those things, amazing to think they hold as long as they do! |
Author: | curtis [ Wed Jan 30, 2008 10:30 am ] |
Post subject: | Re: Neck resets in London |
Guest wrote: i'm in Manchester UK but I'm reasonably familiar with hofner neck-sets, little too far to come for that alone though possibly! The last one I did had divots in the fingerboard you could plant potatoes in, and a neck that you could throw across a room and watch it come back to you! All came good in the end though after a re-fret etc. I even made some feedback busters for the f-holes so it could be used on stage. Strange neck joint on those things, amazing to think they hold as long as they do! Appologies - i thought I was logged in, it came up as 'guest' though. My names Steve Curtis, I run a repair/ build shop in Manchester UK. Our websites still in its early days - too busy with repairs! http://www.ccguitars.co.uk all the best, steve |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |