| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| ebony and rosewood bridges http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=15621 |
Page 1 of 1 |
| Author: | Jody [ Wed Jan 30, 2008 4:45 pm ] |
| Post subject: | ebony and rosewood bridges |
does anyone know where I can get some stock ebony and rosewood bridges ,slotted but without pin holes drilled? thanks Jody |
|
| Author: | Jody [ Wed Jan 30, 2008 4:53 pm ] |
| Post subject: | Re: ebony and rosewood bridges |
even unslotted would work ..jody |
|
| Author: | Michael Dale Payne [ Wed Jan 30, 2008 5:00 pm ] |
| Post subject: | Re: ebony and rosewood bridges |
Jody That may be a hard one with out ordering a run of CNC'd parts from someone like Bob at Saint Lutherie or John Watkins. I know of many manufactured bridges but they all come with slots and pin holes. |
|
| Author: | Bob Garrish [ Wed Jan 30, 2008 5:52 pm ] |
| Post subject: | Re: ebony and rosewood bridges |
How many? |
|
| Author: | Jody [ Wed Jan 30, 2008 6:04 pm ] |
| Post subject: | Re: ebony and rosewood bridges |
I am just looking for a few,just to get me through my first few builds... Jody |
|
| Author: | Bob Garrish [ Wed Jan 30, 2008 7:20 pm ] |
| Post subject: | Re: ebony and rosewood bridges |
Well, check out the pricing on my website. There's just a $15 charge if your order quantity is under 5. Stew Mac has some really cheap bridges if you only want to get one or two and can stand pre-drilled to save some cash. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|