Billy T wrote:
Hey! Why does the reply button say replay? Anybody know!
Developer miss spell despite the nasty rumor Waddy was spreading...I did not do it
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| PM button? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=15631 |
Page 1 of 1 |
| Author: | Dave Higham [ Thu Jan 31, 2008 7:14 am ] |
| Post subject: | PM button? |
I just tried to send a PM by clicking on the button under a post someone made and it opened a window titled 'Quote a post'. Is this normal? Is it for sending a PM to the person quoting the post they made? I didn't want to do that so I went by way of the 'Profile' button. |
|
| Author: | Michael Dale Payne [ Thu Jan 31, 2008 9:04 am ] |
| Post subject: | Re: PM button? |
From what I can tell PM from a topic post is intended to send pms related to the post and if you want to send an unrelated pm you should go to your PM page and use compose an new message then you get a plank message form with a blank title and no quote. It is just a convenience routine to help in relation to a topic. |
|
| Author: | Hesh [ Thu Jan 31, 2008 9:09 am ] |
| Post subject: | Re: PM button? |
Yep I agree with my pal Michael - If you don't want to reference the topic just highlight and delete the quoted posted in the PM. |
|
| Author: | WaddyThomson [ Thu Jan 31, 2008 10:31 am ] |
| Post subject: | Re: PM button? |
What Hesh said. Delete the title and the quote, and you are sending a generic pm. |
|
| Author: | Billy T [ Thu Jan 31, 2008 11:31 am ] |
| Post subject: | Re: PM button? |
Hey! Why does the reply button say replay? Anybody know! |
|
| Author: | Michael Dale Payne [ Thu Jan 31, 2008 11:56 am ] |
| Post subject: | Re: PM button? |
Billy T wrote: Hey! Why does the reply button say replay? Anybody know! Developer miss spell despite the nasty rumor Waddy was spreading...I did not do it
|
|
| Author: | WaddyThomson [ Thu Jan 31, 2008 1:19 pm ] |
| Post subject: | Re: PM button? |
That's OK, Michael, I'm switching to the Payne measuring system. 
|
|
| Author: | Michael Dale Payne [ Thu Jan 31, 2008 1:36 pm ] |
| Post subject: | Re: PM button? |
| That means your lower bouts is are now 3.7688p wide
|
|
| Author: | WaddyThomson [ Thu Jan 31, 2008 2:26 pm ] |
| Post subject: | Re: PM button? |
You got any of those "P" rulers and calipers? Is the smallest measurement in Paynes called a Pico Payne. Then it could be measured in "pp"!  
|
|
| Author: | Michael Dale Payne [ Thu Jan 31, 2008 2:52 pm ] |
| Post subject: | Re: PM button? |
WaddyT wrote: You got any of those "P" rulers and calipers? Is the smallest measurement in Paynes called a Pico Payne. Then it could be measured in "pp"! The total sum of my concern for you problem can only be measured in a micro-give-a-S _ _ _ s There, now we have covered #1 ans #2
|
|
| Author: | WaddyThomson [ Thu Jan 31, 2008 5:41 pm ] |
| Post subject: | Something New on PM's |
I just realized that you cannot see the message of the person who PM'd you when you are typing a response. That makes it hard to respond in kind to questions, unless you open in a different window or something.. Is there any way to make the last message visible in the response area? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|