Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Peghead Question

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

RaymundH

Post subject: Peghead Question

Posted: Fri Feb 01, 2008 9:57 am

Cocobolo

Joined: Tue Jan 29, 2008 9:43 am
Posts: 310
Location: N.B. Canada

Hello!

After doing four headstocks with a standard paddle style headstock I decided to try a slotted pehead on my current L-00 "style" build.
My issue is in regards to my slots. They are standard rounded on each end but I just realize that I will need to make "sting ramps?" at the bottom of each slot to allow the strings to access the tuning machines. Is there a standard measurement for this or is it an eyeball it thing? (Using Grover Sta Tites for my tuning machines)

Thanks!

Ray

_________________
Guitar Building = Continuous Improvement Process

Top

LanceK

Post subject: Re: Peghead Question

Posted: Fri Feb 01, 2008 10:32 am

Site Admin

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8551
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro

I just eye it, and when I'm getting close I place a nut at the end of the FB and then put a straight edge on the nut to the first post hole and verify that I am clearing the floor of the ramp.

You do not have the required permissions to view the files attached to this post.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com

Top

JBreault

Post subject: Re: Peghead Question

Posted: Fri Feb 01, 2008 10:37 am

Koa

Joined: Fri Apr 08, 2005 2:44 am
Posts: 987
Location: United States
First name: Joe
Last Name: Breault
City: Merrimack
State: NH
Status: Amateur

Lance, does that angle change after you slot the nut?

_________________
Joe Breault
Merrimack, NH
Perpetual novice

Top

LanceK

Post subject: Re: Peghead Question

Posted: Fri Feb 01, 2008 10:56 am

Site Admin

JBreault wrote:

Lance, does that angle change after you slot the nut?

Good point, yes you want to use something (anything) that would represent your final string height, or at least close to final height.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com

Top

Steve Kinnaird

Post subject: Re: Peghead Question

Posted: Fri Feb 01, 2008 11:04 am

Contributing Member

Joined: Wed Jan 05, 2005 3:45 pm
Posts: 4337
Location: United States

The terminus of a Martin ramp is almost touching the nut.
At least my little 00 is done that way.
I think it looks good, and you sure avoid the embarrassment of strings digging into your headstock finish.

Steve

_________________
From Nacogdoches...the oldest town in Texas.

http://www.stephenkinnaird.com

Top

Laurent Brondel

Post subject: Re: Peghead Question

Posted: Fri Feb 01, 2008 1:00 pm

Contributing Member

Joined: Wed Aug 31, 2005 7:30 am
Posts: 1792
Location: United States

Slotheads usually have a slender angle, around 12º vs. 18º for Martin I think. Some Spanish guitars have almost no angle on the peghead, which solves the issue of the ramp being too shallow.

_________________
Laurent Brondel
West Paris, Maine - USA
http://www.laurentbrondel.com/

Top

Page 1 of 1

[ 7 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 26 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: