| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Can anyopne give me a basic ukulele dimensions set for a fre http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=15748 |
Page 1 of 1 |
| Author: | clavin [ Tue Feb 05, 2008 10:00 pm ] |
| Post subject: | Can anyopne give me a basic ukulele dimensions set for a fre |
board? I need one to generate some art for, all I need is the length, and top and bottom widths for the most common type. Thanks! Craig L |
|
| Author: | Ricardo [ Tue Feb 05, 2008 10:11 pm ] |
| Post subject: | Re: Can anyopne give me a basic ukulele dimensions set for a fre |
Craig, depends on whether you are talking about a soprano, concert, tenor or baritone uke. Soprano uke dimenstions: length 7.5"; concert: 10 and tenor: 11.5. Baritone, I don't know. Most of these have a 1 3/8 neck width at the nut and 1 3/4 at the 12th fret. I am assuming connection to body at 14th fret. Some fret boards stop at the body and some continue to the sound hole. Hope this helps. |
|
| Author: | Rollo [ Tue Feb 05, 2008 10:16 pm ] |
| Post subject: | Re: Can anyopne give me a basic ukulele dimensions set for a fre |
Craig, Here are my dimensions for a tenor ukulele: Upper bout width: 6 3/4" Lower bout width: 9 1/8" Body lenght: 12 1/4" Aloha, Rollo http://www.koaguitars.com |
|
| Author: | Ricardo [ Tue Feb 05, 2008 10:30 pm ] |
| Post subject: | Re: Can anyopne give me a basic ukulele dimensions set for a fre |
Craig, I was assuming you were talking about fretboard dimensions. |
|
| Author: | Dennis E. [ Wed Feb 06, 2008 8:12 am ] |
| Post subject: | Re: Can anyone give me a basic ukulele dimensions set |
I dug through my stack O' stuff and found this. I can't remember my source for it, but you may find it useful. If I remember correctly these measurements are for the Martin ukes. Soprano, or standard was the most common size of these things "back in the day." Most professional players nowadays go for the tenor. Or so I'm told. 
|
|
| Author: | clavin [ Wed Feb 06, 2008 8:35 am ] |
| Post subject: | Thanks guys that's all great and useful info! You guys rock! |
I promise to post pics when it's done ( if the builder will allow it...  ) Craig L |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|