First off, I'm not a sponsor and I don't intend to offer items like this for sale here or anywhere else. Just wanting to get rid of the extras I have in the shop.
Second off, I PM'd Lance and Brock last week to check and see if it would be ok for me to sell these left over blocks and I got the A.O.K
So, what I have are 7 blocks left over from making myself some new fretboard radius sanding blocks. The blocks are 3" wide x 1-3/8" thick x 16" long. The are made from 3 pieces of 1" eastern hard maple, laminated together with opposing grain direction to help counter warping. These blocks are dead level (in my 45%RH shop) and could easily have sandpaper on the flat side to make a nice flat sanding block as well or on one of the edges.
Actually, 1 of the blocks is under 1-3/8" (my test block) I think about 1-5/16" and is cut to 16" radius the remaining blocks are not radiused yet.
So, here's what I'm offering. The first 6 people who want a block get to pick from 5 different radius' to have the block cut to (12", 14", 16", 18" or 20") , the 7th will get the 16"R test block (or just say you want the test block)
$40 per block plus shipping. The 16" test block I'll sell for $35 as it's under 1-3/8" thick (marginally really but still smaller).
Here's a picture again of the jig used to make the blocks
Attachment:
shop stuff 023.jpg
And here are the two blocks I made for myself, I'm going to cut grooves in one to clear the frets for a clamping caul. You can see the differing grain orientation on the ends.
Attachment:
shop stuff 024.jpg
Post here if you want one and what radius you want it cut too but pm me your shipping information. Payment will be paypal.
.
, 
![[uncle]](./images/smilies/surrenderflagqv6.gif "Uncle")
I was looking for the song on the net this Christmas and had a hard time finding it....
![[headinwall]](./images/smilies/headbangwalluf8.gif "Mad")
![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")