I've got a little ivory, if you can wait a couple of years!
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Does anyoneknow a source for fossil ivory http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=15866 |
Page 1 of 1 |
| Author: | clavin [ Tue Feb 12, 2008 7:04 pm ] |
| Post subject: | Does anyoneknow a source for fossil ivory |
bridge pins and stuff anymore? I have been trying to contact John Mickelson but the service says his number is no longer in service. Maybe it's just technical? I saw him at NAMM so I know he is still out there making products. Does anyone have new contact info for John? I was told he moved recently out of AK. Thanks. Craig L |
|
| Author: | LanceK [ Tue Feb 12, 2008 7:09 pm ] |
| Post subject: | Re: Does anyoneknow a source for fossil ivory |
Craig, check with LMI, they have it. |
|
| Author: | wbergman [ Tue Feb 12, 2008 7:14 pm ] |
| Post subject: | Re: Does anyoneknow a source for fossil ivory |
http://cgi.ebay.com/Fossil-Ivory-Bridge ... dZViewItem Curently on ebay. |
|
| Author: | JWarwick [ Tue Feb 12, 2008 10:19 pm ] |
| Post subject: | Re: Does anyoneknow a source for fossil ivory |
Craig ... David Warther usually has a good supply of raw material as well as finished pins and other parts. I'm away from my shop at the moment , but will post his contact info when I get there in the morning. |
|
| Author: | WaddyThomson [ Tue Feb 12, 2008 11:01 pm ] |
| Post subject: | Re: Does anyoneknow a source for fossil ivory |
I've got a little ivory, if you can wait a couple of years!
|
|
| Author: | senunkan [ Wed Feb 13, 2008 4:22 am ] |
| Post subject: | Re: Does anyoneknow a source for fossil ivory |
JWarwick wrote: Craig ... David Warther usually has a good supply of raw material as well as finished pins and other parts. I'm away from my shop at the moment , but will post his contact info when I get there in the morning. I got my mammoth ivory bridge and nut from David Warther too at the ebay. His ebay ID is warthermuseum. |
|
| Author: | clavin [ Wed Feb 13, 2008 8:21 am ] |
| Post subject: | Thanks Guys. |
I appreciate the help. It seems like John is selling mainly through LMI. I'll check that out more. Craig |
|
| Author: | Michael Dale Payne [ Wed Feb 13, 2008 9:20 am ] |
| Post subject: | Re: Thanks Guys. |
clavin wrote: I appreciate the help. It seems like John is selling mainly through LMI. I'll check that out more. Craig Craig I don't know if your interested or not but I have some raw FWI I got from John last year. I believe I have three pieces left They are about 4" long and about 5/8" wide x 1/2" deep. Now again this is raw bone. Let me know if you want some or all of it. I know John is getting about $260 a LB for the raw bone This would be near 1/4 lb maybe a bit more but I would make you deal on it. |
|
| Author: | clavin [ Wed Feb 13, 2008 11:44 am ] |
| Post subject: | Thanks Mike. |
You have PM |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|