for a tenor Uke?
Just simply how long from the nut face to the end. Thanks!
Craig L
There is a "little" Hawaiian uke reef on the way...
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Can anyone provide me with a rough fingerboard length in inc http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=15878 |
Page 1 of 1 |
| Author: | clavin [ Wed Feb 13, 2008 11:54 am ] |
| Post subject: | Can anyone provide me with a rough fingerboard length in inc |
for a tenor Uke? Just simply how long from the nut face to the end. Thanks! Craig L There is a "little" Hawaiian uke reef on the way...
|
|
| Author: | Rollo [ Wed Feb 13, 2008 1:36 pm ] |
| Post subject: | Re: Can anyone provide me with a rough fingerboard length in inc |
Craig, I slot a 20 fret fingerboard. It measures 12 1/4 inches from the nut to the end of the board. Aloha, Rollo http://www.koaguitars.com |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|