| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Pearl Engraved Name Plate...Where? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=15968 |
Page 1 of 1 |
| Author: | wyodave [ Mon Feb 18, 2008 12:25 pm ] |
| Post subject: | Pearl Engraved Name Plate...Where? |
Where would you buy the Pearl Engraved name plates you see on some guitars at the bottom of the fretboard. They look like they're lazer engraved, maybe in a 1/2 x 1 1/2 in. size. Dave |
|
| Author: | Bob Garrish [ Mon Feb 18, 2008 1:58 pm ] |
| Post subject: | Re: Pearl Engraved Name Plate...Where? |
I'm not sure exactly what you're talking about, I assume a piece of rectangular pearl engraved with a name and inlaid at the 12th fret or somesuch? Anyhow, I sell pretty much anything anyone's ever made of pearl and put on a guitar. I don't think I've put any such pieces on the website, but I do engraved pearl pieces as well as cut ones. If its going on a flat surface then I can just make and send the inlay but if it's engraved and on a fingerboard then I'd need to make the fingerboard here as well, since if I sent the inlay in the flat then you'd sand off the engraving installing it! |
|
| Author: | wyodave [ Tue Feb 19, 2008 10:05 pm ] |
| Post subject: | Re: Pearl Engraved Name Plate...Where? |
Hi Bob, I am talking about a pc. of pearl way down on the bottom of the fretboard that has a makers name lazered(or what I think is lazered). I've got a pic but it's so small don't think you could see it. I'll see if I can find a better one. Dave |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|