| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Grain Filler with Tung Oil http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=16009 |
Page 1 of 1 |
| Author: | Jonas [ Wed Feb 20, 2008 4:41 pm ] |
| Post subject: | Grain Filler with Tung Oil |
I've just recently been doing some finishing tests for my nearly completed electric guitar (oak body, maple top). It seems that the maple takes 5 or 6 coats to build a sheen and have a degree of smoothness which seems like too many coats to me. For the finishing sample i sanded and wet sanded the wood down with very fine paper and then stained the top. Should I fill the grain with something like Z-Poxy before I stain and oil the wood? I'm a little new to finishing so I'm not to sure on some points. Also, how many coats of tung oil should usually be used? thanks |
|
| Author: | Barry Daniels [ Wed Feb 20, 2008 4:43 pm ] |
| Post subject: | Re: Grain Filler with Tung Oil |
Maple is a closed pore wood so grain filler is not needed. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|