***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Nov 25, 2024 4:50 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
sharp_custom
PostPosted: Sat Feb 23, 2008 9:30 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Nov 08, 2006 6:12 am
Posts: 216
Location: United States
I need a router template guitar for a 1-5/8" diameter bit. Does anyone know where I can find one with a 1-3/4" ID for PC or Bosch? PC has one at 1-35/64" but that's the largest I've seen. I'm thinking I may have to have one machined. Any suggestions?

Thanks, Don

_________________
Don Sharp
Got Brazilian?
http://www.sharpguitars.com
Top
 Profile  
 
John How
PostPosted: Sat Feb 23, 2008 11:48 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jan 03, 2005 7:40 am
Posts: 2694
Location: United States
First name: John
Last Name: How
City: Auburn
State: Ca
Country: USA
That's a big bit, just wondering why your locked in to using a bit that size.

_________________
Tickle your guitar daily, and it'll tickle you back.
Top
 Profile  
 
Kent Chasson
PostPosted: Sat Feb 23, 2008 11:50 am 
Offline
Koa
Koa
User avatar

Joined: Fri Mar 23, 2007 9:56 am
Posts: 1271
If you can find the right size tubing, you could make a plywood base plate with a 1-3/4" hole and epoxy in a piece of tubing. You should be able to make something as safe and secure as the screw in kind. Even something like ABS could work if you can deal with the thicker wall and greater offset.

_________________
http://www.chassonguitars.com
Top
 Profile  
 
psl53
PostPosted: Sat Feb 23, 2008 4:39 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Tue Mar 20, 2007 3:45 pm
Posts: 206
Location: United States
Don,
You mean a guide??? Again, just curious, what are you doing with it that you need that large a bit?
I would think have one machined may likely be your only option.
Thanks
Peter
Top
 Profile  
 
sharp_custom
PostPosted: Sat Feb 23, 2008 5:21 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Nov 08, 2006 6:12 am
Posts: 216
Location: United States
Thanks for the advise everyone. I have a very specific application and this size bit is the only one that will provide the results I need. I've been searchint the internet all day and haven't come up with one. So I guess the next step is to make one or have one machined.

Are there any michinists on this forum that I can send business to?

Thanks Again.

_________________
Don Sharp
Got Brazilian?
http://www.sharpguitars.com
Top
 Profile  
 
Kent Chasson
PostPosted: Sat Feb 23, 2008 5:40 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Mar 23, 2007 9:56 am
Posts: 1271
Now I'm confused. Are you talking about a guide that mounts on the base like these?

Or a bearing bit that size?


You do not have the required permissions to view the files attached to this post.

_________________
http://www.chassonguitars.com
Top
 Profile  
 
sharp_custom
PostPosted: Sat Feb 23, 2008 6:03 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Nov 08, 2006 6:12 am
Posts: 216
Location: United States
Kent Chasson wrote:
Now I'm confused. Are you talking about a guide that mounts on the base like these?

Or a bearing bit that size?


A guide like those in the picture.

_________________
Don Sharp
Got Brazilian?
http://www.sharpguitars.com
Top
 Profile  
 
psl53
PostPosted: Sat Feb 23, 2008 6:48 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Tue Mar 20, 2007 3:45 pm
Posts: 206
Location: United States
John Hall is, give him a try at http://www.bluescreekguitars.com/
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 73 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com