| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Massive Jointer for sale http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=16172 |
Page 1 of 1 |
| Author: | Rick Turner [ Fri Feb 29, 2008 3:18 pm ] |
| Post subject: | Massive Jointer for sale |
I have a massive Crescent 8" jointer for sale. It's both larger than I need for a most things, and it's smaller than I need as a complement to my resaw. I've got a couple of other 6" jointers that do the trick for a lot of work here, and I need a 12" jointer to properly prep billets for the resaw, so this machine is an in between size for me. It is a classic... a beautiful hunk of Golden Era iron and steel with a large direct drive 208 or 480 volt three phase 2 hp motor (that's draft horses, not ponies), parallelogram table movement, spring loaded knife guard, modern round cutterhead (many of these had the hand eating square cutterhead); it's got the works. $800.00, but you've got to pick it up here in Santa Cruz. I can get it onto a truck. |
|
| Author: | Dave Fifield [ Sat Mar 01, 2008 2:59 am ] |
| Post subject: | Re: Massive Jointer for sale |
Hi Rick, I'll spread the word about your jointer around the woodworkers of the San Jose/Santa Clara/Sunnyvale/Los Gatos area if you like. I'm sure someone would be glad to get a nice 8" job for $800. Cheers, Dave F. |
|
| Author: | Rick Turner [ Sat Mar 01, 2008 3:24 pm ] |
| Post subject: | Re: Massive Jointer for sale |
Thanks. It really is a wonderful machine for the right person and application. The direct drive thing is amazing in how much power it delivers. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|