| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Library of plans: 650mm Bolt-on Classical http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=16219 |
Page 1 of 1 |
| Author: | Michael Dale Payne [ Mon Mar 03, 2008 3:02 pm ] |
| Post subject: | Library of plans: 650mm Bolt-on Classical |
Ok boys and girls I just sent Brock the plans for the 650mm Bolt-on Classical neck. It will likely be a week or so before Brock or Lance is able to get it posted and ready for sale but it is done and submitted. You will notice that I did not locate the inserts in the neck to allow each to use what ever type they wish. There are holes in the neck block shown for 1/4" diameter bolts. Enjoy   Attachment: OLF bolt on classical 650-Model.png
|
|
| Author: | Brock Poling [ Mon Mar 03, 2008 3:06 pm ] |
| Post subject: | Re: Library of plans: 650mm Bolt-on Classical |
Awesome! Thank you so much Michael! The printer we used went out of biz and we are in the process of switching over to another. It might be a week or so before we have these printed. Thanks again! |
|
| Author: | Michael Dale Payne [ Mon Mar 03, 2008 5:22 pm ] |
| Post subject: | Re: Library of plans: 650mm Bolt-on Classical |
We seem to always have a hard time making things work in regards to the Library of plans. May be time to give reconsideration to electronic format. PDF and DWF. Not the greatest thing as far as controlling distribution but there would be no printing. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|