Anyone interested in Spruce cut in the Adirondacks ?
His name is Ralph Charles -
e-mail is rsc3@northnet.org
he sells other Adirondack woods also!
![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
Mike
http://www.collinsguitars.com
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Real Adirondack Spruce http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=16237 |
Page 1 of 1 |
| Author: | Mike Collins [ Tue Mar 04, 2008 2:56 pm ] |
| Post subject: | Real Adirondack Spruce |
Anyone interested in Spruce cut in the Adirondacks ? His name is Ralph Charles - e-mail is rsc3@northnet.org he sells other Adirondack woods also! Mike http://www.collinsguitars.com |
|
| Author: | Frei [ Tue Mar 04, 2008 8:33 pm ] |
| Post subject: | Re: Real Adirondack Spruce |
Which state does he cut in? Adi cutters can be secretive. Any recommends from builders? I was going to get some low end $35.oo tops from Adirondakspruce.com. -Anyone comment on these guys at that price? my last set of adi bracewood was about as stiff as the sitka. Is that normal? I could tell the engleman was alot looser. |
|
| Author: | JJ Donohue [ Tue Mar 04, 2008 8:57 pm ] |
| Post subject: | Re: Real Adirondack Spruce |
Up until recently, I've used Adirondackspruce.com for adi. They are a great supplier. Lately I have been buying Adi from RC Tonewoods. Bob has a large selection of product and some of the stiffest sets I have ever felt. As always, you can never go wrong with products from "The Zootman"...and he has been an OLF sponsor since day one! |
|
| Author: | Frei [ Tue Mar 04, 2008 9:10 pm ] |
| Post subject: | Re: Real Adirondack Spruce |
Ive had enough WAS for now, I need stuff I can build with. Got some nice Italian for when I grow up, Ziricote set, cuban mohag, I need some for the new dred. ( Im using martin necks so I can crank out the bods..... ) 
|
|
| Author: | Terry Stowell [ Tue Mar 04, 2008 11:13 pm ] |
| Post subject: | Re: Real Adirondack Spruce |
[quote="Mike Collins"]Anyone interested in Spruce cut in the Adirondacks ? As Mike states, it's cut in the Adirondacks, where they make Adirondack spruce 
|
|
| Author: | Mike Collins [ Wed Mar 05, 2008 2:00 pm ] |
| Post subject: | Re: Real Adirondack Spruce |
Thanks Terry ! ![[clap]](./images/smilies/smiley32.gif "adulations") I've saw a variety of his woods last fall. That selection was very nice. If you go to http://www.luth.org and search his name you'll find he did a story on how he selects and cuts his wood. It was 2 or 3 years ago! I see many makers wanting this wood ;that's why I'm alerting you all about him! Mike |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|