Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Nov 25, 2024 9:39 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 18 posts ] 
Author Message
PostPosted: Tue Mar 04, 2008 8:58 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
I'm not pleased with the look of the plastic or metal control knobs on Shredder.

1) Are there suppliers who provide standard wood knobs for such applications?

2) Is there anyone who can turn 2 knobs from wood to specs I could provide? I would also provide the wood in this case.

TIA

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com


Top
 Profile  
 
PostPosted: Tue Mar 04, 2008 9:16 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sun Feb 27, 2005 10:11 am
Posts: 2173
Hi JJ,
All parts has wood knobs in stock.


Top
 Profile  
 
PostPosted: Tue Mar 04, 2008 9:22 am 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 31, 2007 7:17 am
Posts: 1383
Location: Canada
JJ, you can make your own wooden knobs if you want (...kind of fun actually). I've never used a "storebought" (always thought they were overly large).
I counterbore (1/2" x 1/8" deep) a wood disc to recess the topmost (pot) nut, then drill almost through for a "mandrel" (I use 3/16"SS trussrod material).
Mount the mandrel in a drillpress, and shape (I use dremel, then files / sandpaper.) Great fun!
You might screw up a couple, but who cares! and you can make prettier ones than you could ever buy, using laminations, inlay dots or whatever. Go crazy!

_________________
Dave
Milton, ON


Top
 Profile  
 
PostPosted: Tue Mar 04, 2008 9:28 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jan 03, 2005 7:40 am
Posts: 2694
Location: United States
First name: John
Last Name: How
City: Auburn
State: Ca
Country: USA
JJ, LMI has boxwood, rosewood and ebony knobs in the tele style.

_________________
Tickle your guitar daily, and it'll tickle you back.


Top
 Profile  
 
PostPosted: Tue Mar 04, 2008 10:00 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
Thanks, guys...I checked LMI and All Parts. They are all of the Tele variety. I was hoping to see the bell knob style as used on Strats and LPs.

Dave...I just may take a shot at making some as you suggest. A small lathe would certainly go a lot faster but I'm in no hurry. Thanks for the suggestion. I already have the laminate made up and will give it a go. I may just learn something!

In the meantime, if anyone has an idle lathe who wants to make a deal, let me know...I'll need 4 more as soon as my 2nd electric emerges from finishing at Joe's.

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com


Top
 Profile  
 
PostPosted: Tue Mar 04, 2008 2:01 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jun 08, 2005 1:00 pm
Posts: 1644
Location: United States
City: Duluth
State: MN
Country: USA
Focus: Build
Status: Amateur
JJ,

Another place to check: THG Knobs

Dennis

_________________
Dennis Leahy
Duluth, MN, USA
7th Sense Multimedia


Top
 Profile  
 
PostPosted: Tue Mar 04, 2008 2:02 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
Check out this place...http://thgknobs.goestores.com/

They not only have a large selection of control knobs but they also offer pickup rings, tuner buttons etc.

They're not cheap!

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com


Top
 Profile  
 
PostPosted: Tue Mar 04, 2008 2:03 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
Dennis...great minds sometimes click simultaneously!

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com


Top
 Profile  
 
PostPosted: Tue Mar 04, 2008 2:10 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jun 08, 2005 1:00 pm
Posts: 1644
Location: United States
City: Duluth
State: MN
Country: USA
Focus: Build
Status: Amateur
No, THG knobs are not cheap. Note that they offer a "bell" option. It's probably more a place where a player would go to get parts to hotrod a guitar, rather than a luthier. Obviously, you have plenty of skill to make knobs if you can make a guitar. However, there are certainly times when it is smart to outsource within lutherie.

Though I can't say I have done this, I do know that some folks use a drill press as a makeshift "lathe" for small items.

Happy turning!

Dennis

_________________
Dennis Leahy
Duluth, MN, USA
7th Sense Multimedia


Top
 Profile  
 
PostPosted: Tue Mar 04, 2008 4:12 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue May 02, 2006 9:02 am
Posts: 2351
Location: Canada
First name: Bob
Last Name: Garrish
City: Toronto
State: Ontario
Country: Canada
Status: Professional
I'm going to have them in my upcoming online store, but if you're in a hurry then I can machine up a set for you. If you have a laminate already done up, you can mail it up here. Just e-mail me if that's the way you decide to go.

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services


Top
 Profile  
 
PostPosted: Wed Mar 05, 2008 10:39 am 
Offline
Koa
Koa
User avatar

Joined: Mon Mar 26, 2007 6:42 am
Posts: 564
Location: United States
First name: Stephen
Last Name: Ziegenfuss
City: Jackson
State: MI
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
JJ -
Make them!!! it is quite fun...These are set of coco knobs for the bass that I am currently building...I do not even have a lathe, but was able to dangerously use a router to roughly round these out to the diameter that I wanted...then I used forstener bits to pocket them and added steel set screws...some sanding and buffing gave me this:

It is so much better than plastic, and cheaper in cost (not time) than buying them..Also you then ahve that much more control over the artistic accents you apply to your guitar...picking matching woods, etc....

Stephen


You do not have the required permissions to view the files attached to this post.

_________________
www.ziegenfussguitars.com


Top
 Profile  
 
PostPosted: Wed Mar 05, 2008 11:14 am 
Offline
Koa
Koa

Joined: Wed Aug 24, 2005 11:13 am
Posts: 1398
Location: United States
Hard to beat the quality and price of the rosewood and ebony knobs from Grizzly. Dome knobs, nice ab dot on top, brass lined with a set screw (the weakest part), nicely finished and all of $1.75 apiece. I reject about 10% of them, and that still works out nicely.


Top
 Profile  
 
PostPosted: Wed Mar 05, 2008 11:22 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
Ziegenfuss wrote:
JJ -
Make them!!! it is quite fun...These are set of coco knobs for the bass that I am currently building...I do not even have a lathe, but was able to dangerously use a router to roughly round these out to the diameter that I wanted...then I used forstener bits to pocket them and added steel set screws...some sanding and buffing gave me this:

It is so much better than plastic, and cheaper in cost (not time) than buying them..Also you then ahve that much more control over the artistic accents you apply to your guitar...picking matching woods, etc....

Stephen


Stephen...I agree...they do look MUCH better than plastic or metal, but...That router "tip" you suggested scares the bejeebers out of me and I will graciously decline the suggestion.

I'm planning to investigate 3 paths:

1) send the laminates I made to Bob Garrish and have him do them for both guitars (6 knobs)
2) Look around for someone with a lathe and see if I can use it to turn the knobs myself
3) Try the drill press technique as suggested by Dave.

Cost vs. my time will have a lot to do with my choice.

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com


Top
 Profile  
 
PostPosted: Wed Mar 05, 2008 12:00 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Mar 26, 2007 6:42 am
Posts: 564
Location: United States
First name: Stephen
Last Name: Ziegenfuss
City: Jackson
State: MI
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Heck yeah JJ...

Don't do the router thing...I was planning on seeing if someone on the forum wouldn't mind turning down a few dowels for me to my desired diameter - then I would have stock on hand to slice, dome, and hollow to make knobs from...

Either way, I would love to see what you come up with...

Stephen

_________________
www.ziegenfussguitars.com


Top
 Profile  
 
PostPosted: Wed Mar 05, 2008 12:26 pm 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8551
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
JJ, Steve is a bass player, so finger are purely optional laughing6-hehe

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Wed Mar 05, 2008 12:43 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
Rick Turner wrote:
Hard to beat the quality and price of the rosewood and ebony knobs from Grizzly. Dome knobs, nice ab dot on top, brass lined with a set screw (the weakest part), nicely finished and all of $1.75 apiece. I reject about 10% of them, and that still works out nicely.


I saw those as well, Rick. Thanks for the heads up. I just happen to want the Bell-type knob...and I also decided that I'd use a laminate to go with the laminate look I have on the body. Kinda dictates a different direction.

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com


Top
 Profile  
 
PostPosted: Wed Mar 05, 2008 12:44 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
Lance Kragenbrink wrote:
JJ, Steve is a bass player, so finger are purely optional laughing6-hehe


Stubs actually might work better! wow7-eyes

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com


Top
 Profile  
 
PostPosted: Wed Mar 05, 2008 1:14 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Mar 26, 2007 6:42 am
Posts: 564
Location: United States
First name: Stephen
Last Name: Ziegenfuss
City: Jackson
State: MI
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
All I really need is the side of my thumb and one finger...:)

_________________
www.ziegenfussguitars.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 18 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Bing [Bot], Glenn LaSalle and 61 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com