Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Vise recommendation

Page 1 of 1

[ 16 posts ]

Print view

Previous topic | Next topic

Author

Message

SkyHigh

Post subject: Vise recommendation

Posted: Tue Mar 04, 2008 9:29 pm

Cocobolo

Joined: Fri Nov 16, 2007 6:06 am
Posts: 329

Hi!

I'm finishing up my first bench and would like to know what's the first vise or first two vise I should look into getting. I would appreciate an exact model.

Also, the top for my bench will be single 3/4" plywood. Would you guys put another ply or other material making it bit thicker? or would 3/4" thick be good enough for most purpose.

Thanks, David

Top

Rod True

Post subject: Re: Vise recommendation

Posted: Tue Mar 04, 2008 10:03 pm

Contributing Member

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada

Hi David, I had a post on this same question about 3 or 4 weeks ago. Take a look here

I ended up getting the patternmakers vise from Japan Woodwork and I've got it in the shop now. I'm wondering what took me so long to get it.

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson

Top

SkyHigh

Post subject: Re: Vise recommendation

Posted: Tue Mar 04, 2008 10:21 pm

Cocobolo

Joined: Fri Nov 16, 2007 6:06 am
Posts: 329

fmorelli wrote:

I suggest you put 2 sheets of 3/4" MDF under the plywood - glue the MDF together on a flat concrete floor, to increase rigidity. MDF is cheap, and it will add significant weight and stability.

As for the vise - StewMac makes a nice one - similar to Japan Woodworker or Woodcraft I believe. you might also spring for a Parrot vise - made in china copies available from Grizzly I believe.

Filippo

Hi Filippo,

If I understand you correct, my top will be 3 1/4" thick, right? two MDF at 3/4" each plus 3/4" ply. If so, wow that's thick.

Thanks, David

Top

SkyHigh

Post subject: Re: Vise recommendation

Posted: Tue Mar 04, 2008 10:23 pm

Cocobolo

Joined: Fri Nov 16, 2007 6:06 am
Posts: 329

Rod True wrote:

Thanks Rod,

Why did you go for this one instead of Stewmac's?
Did you modifiy anything on it? if so, was it difficult and costly?

Top

Rod True

Post subject: Re: Vise recommendation

Posted: Tue Mar 04, 2008 10:29 pm

Contributing Member

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada

Less $$$ for pretty much the same thing. I works great.

Top

SkyHigh

Post subject: Re: Vise recommendation

Posted: Tue Mar 04, 2008 11:09 pm

Cocobolo

Joined: Fri Nov 16, 2007 6:06 am
Posts: 329

fmorelli wrote:

SkyHigh wrote:

If I understand you correct, my top will be 3 1/4" thick, right? two MDF at 3/4" each plus 3/4" ply. If so, wow that's thick.

I was suggesting just adding two 3/4" MDF to the bottom (with one 3/4" play that gets you to 2 1/4"). On my bench, I added another 3/4" plywood bottom, coming to a total of 3" thick. I glued the MDF core together, screwed the plywood top and bottom on. On the top, I countersunk the screws, then drove oversized maple plugs in. If you hack the top up enough, you can always pop the plugs, unscrew the top and slap another on. I bound the edge with 1"x4" maple available at the Borg. If you search through the stack, the curly maple comes for free and looks nice under Tung oil.

Filippo

Thanks for the tip but what's "borg"?

Top

David Collins

Post subject: Re: Vise recommendation

Posted: Tue Mar 04, 2008 11:29 pm

Brazilian Rosewood

Joined: Sat Dec 03, 2005 10:04 am
Posts: 2060

I work on completed instruments much more than parts, so my needs probably differ from most. I have one of the vises pictured above, but it's extremely rare that I use it. My main vises are more like a leg vise I suppose. A bench screw, pine 2"x4"s (soft and flexible, I would never use hardwood), a hinge at the bottom, and a leather strap for padding. I have four of them in my shop, and am so used to it I can't imagine not having one at the end of my bench.

Attachment:

vise.jpg

My daughter has one at her bench as well.

Attachment:

Ava's_bench.jpg

_________________
Eschew obfuscation, espouse elucidation.

Top

ecklesweb

Post subject: Re: Vise recommendation

Posted: Tue Mar 04, 2008 11:46 pm

Cocobolo

Joined: Sat Jan 21, 2006 10:41 am
Posts: 290
Location: United States

If you'll be doing hand planing, front and tail vises are pretty handy. And, yes, you need a thicker top to keep it flat and to make it heavier/more stable.

My front vise is a Shop Fox knockoff of a Record. My tail vise is an even cheaper no-name knockoff of a smaller Record. I love the front vise, not so much the tail vise. Here's a pic of the shop fox:

Can't imagine life without it.

Top

ecklesweb

Post subject: Re: Vise recommendation

Posted: Wed Mar 05, 2008 12:11 am

Cocobolo

Joined: Sat Jan 21, 2006 10:41 am
Posts: 290
Location: United States

Rod True wrote:

I ended up getting the patternmakers vise from Japan Woodwork and I've got it in the shop now.

You know, this is what I've always thought of as a patternmakers vise:

Does anyone use one of these? They rotate, tilt, have cam-closing action, and have double-dogs on both jaws for holding weird-shaped stuff. Looks useful but tempermental. The guy who taught me how to use a plane had one and swore by it.

Top

Bruce Dickey

Post subject: Re: Vise recommendation

Posted: Wed Mar 05, 2008 12:29 am

Brazilian Rosewood

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas

It's a Mariomoment! Thanks Dave!

David Collins, thanks for posting this. I'm building ONE OF THESE!

Mario shares about the GLEANING that takes place by participating on forums usually about every three or four weeks. This is one of those. And it's all because of YOU David Collins. Now tell us David, where did you STEAL this idea?

[:Y:]

_________________
http://www.dickeyguitars.com

Top

Lillian F-W

Post subject: Re: Vise recommendation

Posted: Wed Mar 05, 2008 7:27 pm

Koa

Joined: Fri Jun 30, 2006 4:23 pm
Posts: 1694
Location: United States
First name: Lillian
Last Name: Fuller-Watson
State: WA
Country: USA
Focus: Build
Status: Amateur

SkyHigh wrote:

Thanks for the tip but what's "borg"?

Home Depot or Lowes types of stores. Big box stores.

_________________
Aoibeann

Top

Billy T

Post subject: Re: Vise recommendation

Posted: Thu Mar 06, 2008 2:35 am

Brazilian Rosewood

Joined: Sun Dec 25, 2005 7:58 pm
Posts: 2946
Location: United States

Aoibeann wrote:

SkyHigh wrote:

Thanks for the tip but what's "borg"?

Home Depot or Lowes types of stores. Big box stores.

B-ig O-range R-etail G-iant

_________________
Billy Dean Thomas
Covina, CA

"Multi famam, conscientiam, pauci verentur."
(Many fear their reputation, few their conscience)

Top

Page 1 of 1

[ 16 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 49 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: