There goes Dave, with his mind in the gutter again!
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Lie Nielsen Toolworks Cocobola option. http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=16382 |
Page 1 of 1 |
| Author: | TonyFrancis [ Wed Mar 12, 2008 8:58 pm ] |
| Post subject: | Lie Nielsen Toolworks Cocobola option. |
. |
|
| Author: | Rick Turner [ Wed Mar 12, 2008 9:07 pm ] |
| Post subject: | Re: Lie Nielsen Toolworks Cocobola option. |
Have you bought cocobolo recently? It's not going to get cheaper, either... And some luthiers...Kathy Wingert for one...charge a hefty premium for cocobolo because of the precautions they have to take to avoid serious allergic reactions to the dust and oils. |
|
| Author: | Dave White [ Thu Mar 13, 2008 6:35 am ] |
| Post subject: | Re: Lie Nielsen Toolworks Cocobola option. |
What's the upcharge for depleted Uranium handles then ? |
|
| Author: | TonyFrancis [ Thu Mar 13, 2008 6:57 am ] |
| Post subject: | Re: Lie Nielsen Toolworks Cocobola option. |
. |
|
| Author: | Dave White [ Thu Mar 13, 2008 7:14 am ] |
| Post subject: | Re: Lie Nielsen Toolworks Cocobola option. |
TonyFrancis wrote: I think I shall make my own handles and totes, for $50 I can buy heaps of Cocobola and start my own black market of LN parts. TONYFRANCISTOOLWORKS.com, "Toothing irons, totes and Knob's"... I can see that phone running of the hook... I can see a lot of dubious product SPAM e-mails heading your way too unless you change the wording slightly! |
|
| Author: | WaddyThomson [ Thu Mar 13, 2008 9:44 am ] |
| Post subject: | Re: Lie Nielsen Toolworks Cocobola option. |
There goes Dave, with his mind in the gutter again!
|
|
| Author: | SteveCourtright [ Thu Mar 13, 2008 2:16 pm ] |
| Post subject: | Re: Lie Nielsen Toolworks Cocobola option. |
Well, you could just do what I did and go to Costa Rica yourself! No, I didn't find any tonewood, but I am pretty sure it could be found with some poking around! By the way, this beauty was about $40. I kind of hate to put salad in it!
|
|
| Author: | Laurent Brondel [ Thu Mar 13, 2008 2:52 pm ] |
| Post subject: | Re: Lie Nielsen Toolworks Cocobola option. |
Dave White wrote: What's the upcharge for depleted Uranium handles then ? There's a bulk sale in Iraq right now. Shipping isn't cheap though. |
|
| Author: | charliewood [ Thu Mar 13, 2008 3:14 pm ] |
| Post subject: | Re: Lie Nielsen Toolworks Cocobola option. |
When I ordered my last batch of goodies from the Canadian rep of LN, Rob Cosman, I had the same idea for coco handle and knob... the guy I talked to on the phone said just forget about cocobolo... he said that it was being discontinued,,, while perhaps that was once a consideration, it appears that now its available again but appreciably more costly.(mabye the guy was just yanking my chain to get me to buy stock they had on hand I dont know,,, What I do know is that I like the cherry well enough - I can always make a new tote and knob myself if I want a fancier one.... Cheers Charlie |
|
| Author: | Laurent Brondel [ Thu Mar 13, 2008 4:12 pm ] |
| Post subject: | Re: Lie Nielsen Toolworks Cocobola option. |
ToddStock wrote: It takes some time to get enough DU gathered for a project. In my enthusiasm I forgot that detail. Well, they never said there was a warranty either… |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|