Hello,
Does anyone know where I can order/buy a decent replacement conveyor belt for a Perfromax 16/32 drum sander.
I found a resonably priced outfit but they don't ship up here.
Thanks,
Ray
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Performax 16/32 Replacement Belt http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=16558 |
Page 1 of 1 |
| Author: | RaymundH [ Mon Mar 24, 2008 2:06 pm ] |
| Post subject: | Performax 16/32 Replacement Belt |
Hello, Does anyone know where I can order/buy a decent replacement conveyor belt for a Perfromax 16/32 drum sander. I found a resonably priced outfit but they don't ship up here. Thanks, Ray |
|
| Author: | bob_connor [ Mon Mar 24, 2008 3:56 pm ] |
| Post subject: | Re: Performax 16/32 Replacement Belt |
G'day Ray Can't help you with supply (I'm in Australia) but I would advise NOT to get the rubber replacement conveyer. We recently replaced ours and got talked into getting the rubber one instead of the sandpaper type that originally came with the 16/32 and it's crap. It constantly slips and doesn't hold the wood nearly as well as the original. I've just finish sanded 35 Blackwood sets and I've had to hold every one of them down on the conveyor so I'm not happy. They both cost around $85 here in Oz. Cheers Bob |
|
| Author: | Michael Dale Payne [ Mon Mar 24, 2008 4:06 pm ] |
| Post subject: | Re: Performax 16/32 Replacement Belt |
Where is here?  if in the continintal US I would go directly to Jet/Performax for replacement parts your manual should have a the contact info.
|
|
| Author: | Bobc [ Mon Mar 24, 2008 5:34 pm ] |
| Post subject: | Re: Performax 16/32 Replacement Belt |
try Industrial Abrasives. I've been buying belts for my 22-44 from them. I think you have to buy a minimum of 2 but they are really cheap and work well. You just need to know the dimensions and they will make them up for you. |
|
| Author: | Jon L. Nixon [ Mon Mar 24, 2008 8:19 pm ] |
| Post subject: | Re: Performax 16/32 Replacement Belt |
Try Klingspor. Lots of other neat stuff also.http://www.woodworkingshop.com/cgi-bin/8A0DBF28/mac/qryitems.mac/itemDisplay?lenSgDsc=6DRUMACDRUM%20SANDER%20ACCESSORIES&qryType=GRPSG |
|
| Author: | Blain [ Tue Mar 25, 2008 12:03 am ] |
| Post subject: | Re: Performax 16/32 Replacement Belt |
Woodcraft carries them also. You can buy online or in the store. It's been a little while since I bought mine, but I think it was somewhere around $45-$50 Blain |
|
| Author: | Guest [ Tue Mar 25, 2008 6:58 am ] |
| Post subject: | Re: Performax 16/32 Replacement Belt |
Thank you for the leads everyone I really appreciate the help! PS..."Up here" is Eastern Canada! Take Care, Ray |
|
| Author: | Mitch Cain [ Tue Mar 25, 2008 7:22 am ] |
| Post subject: | Re: Performax 16/32 Replacement Belt |
I just bought two from Rockler as well - around $50 each - I think they ship to Canada... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|