| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| A handy little tool http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=16614 |
Page 1 of 1 |
| Author: | Cecil [ Thu Mar 27, 2008 8:27 pm ] |
| Post subject: | A handy little tool |
I bought this adjustable triangle several years ago when I was making a highchair for my first grand daughter. The Wood magazine plan suggested it for setting up the required compound miters on a table saw. It is still used for that purpose and many others as in the attached picture. It is the perfect tool for transferring angles from a drawing or setting angles on an original drawing. It is graduated by 1/2 degrees. The scale is large and easy to read. ; Cecil |
|
| Author: | Cecil [ Thu Mar 27, 2008 8:31 pm ] |
| Post subject: | Re: A handy little tool |
Well, that didn't work. I guess I need some help getting the image from my picture file to the post. Cecil |
|
| Author: | WaddyThomson [ Thu Mar 27, 2008 9:25 pm ] |
| Post subject: | Re: A handy little tool |
Use the browse box below the reply box. The pic must be less than 256K in size. After going to browse, entering your pic, click the "Add the File" button, wait for the file to download, scroll down and click the "Place in line" button. It will put the picture file where your cursor was, or on the next line. |
|
| Author: | Cecil [ Fri Mar 28, 2008 12:35 pm ] |
| Post subject: | Re: A handy little tool |
Thanks Waddy, Here is the promised picture. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|