Yes, Tom Ellis has the inlay. I couldn't find a web site for Precision Pearl Inlay but did find a photo of the Flush inlay.
Philip
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Royal Flush Inlay - Source ? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=16669 |
Page 1 of 1 |
| Author: | rich altieri [ Mon Mar 31, 2008 5:45 pm ] |
| Post subject: | Royal Flush Inlay - Source ? |
I saw a Royal Flush inlay for headstock somewhere along the way a couple of years ago. Any one know who created it, or where I might get a similar inlay for a headstock? Also looking for hearts, spades, diamonds and clubs inlays for fretboard and cant seem to find them from well known suppliers. |
|
| Author: | Brad Goodman [ Mon Mar 31, 2008 6:58 pm ] |
| Post subject: | Re: Royal Flush Inlay - Source ? |
The sign on the side of the plumbers truck says "In our bussiness, a flush beats a full house!!" Or, on the septic truck it says "We're #1 in the #2 bussiness" Oh- I believe Tom Ellis has the "royal Flush" inlay. |
|
| Author: | Philip Perdue [ Mon Mar 31, 2008 7:23 pm ] |
| Post subject: | Re: Royal Flush Inlay - Source ? |
Yes, Tom Ellis has the inlay. I couldn't find a web site for Precision Pearl Inlay but did find a photo of the Flush inlay. Philip |
|
| Author: | cyborgcnc [ Mon Mar 31, 2008 7:55 pm ] |
| Post subject: | Re: Royal Flush Inlay - Source ? |
And here is a little about how the process works.... http://www.frets.com/FretsPages/FieldTr ... ellis.html :l 
|
|
| Author: | Terry Stowell [ Mon Mar 31, 2008 8:55 pm ] |
| Post subject: | Re: Royal Flush Inlay - Source ? |
 Thought this was a "mother of toilet seat" thread. Grandma's old seat is made of that stuff. Purdy
|
|
| Author: | Bob Garrish [ Mon Mar 31, 2008 9:44 pm ] |
| Post subject: | Re: Royal Flush Inlay - Source ? |
I can cut that type stuff for you if you can't find it as a stock item somewhere, Rich. The execution isn't a problem, but high-end work is high-end pricey if it's a one-off
|
|
| Author: | Michael Dale Payne [ Tue Apr 01, 2008 10:20 am ] |
| Post subject: | Re: Royal Flush Inlay - Source ? |
The problem is that Tom has a minimal order size per component. I built a poker table some 6 years back for a close friend and wanted to use these very inlays. Tom's sales staff said the minimum at the time I checked was 30 units per component if I remember right |
|
| Author: | rich altieri [ Tue Apr 01, 2008 2:30 pm ] |
| Post subject: | Re: Royal Flush Inlay - Source ? |
Thanks to all for your replies. Very helpful as always - you guys rock !!! Bob, I am building this guitar for a friend who came up with this idea and if you are willing to shoot me a price I would be happy to have you do it if my friend is willing to go the expense. You can email me at: rich@richaltieri.com |
|
| Author: | 1bordeaux [ Wed Apr 02, 2008 11:46 am ] |
| Post subject: | Re: Royal Flush Inlay - Source ? |
Bob Garrish wrote: I can cut that type stuff for you if you can't find it as a stock item somewhere, Rich. The execution isn't a problem, but high-end work is high-end pricey if it's a one-off Unless you want it hand cut... P.M. me and I'll send you a photo of one I did on the first fret 5-6 years ago. Paul |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|