| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Question for those that have the SE 114 Torres plan... http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=16913 |
Page 1 of 1 |
| Author: | Alexandru Marian [ Fri Apr 18, 2008 1:29 pm ] |
| Post subject: | Question for those that have the SE 114 Torres plan... |
 If by any chance possible and not too much trouble, can anyone measure the width of the guitar at 270mm (10 inches and a half if you dont have a metric rule) from the 12th fret? I need this to proof the cad i'll be using to cnc a sides mold..... THANKS!  PS i promise ill buy the plans i need asap and stop posting such silly requests....Sorry if i offended anyone 
|
|
| Author: | vachterman [ Sat Apr 19, 2008 6:32 am ] |
| Post subject: | Re: Question for those that have the SE 114 Torres plan... |
i dont have the plan here with me. it is at the workshop. but what i do have here is the tracing i made, which i used to make the mold with. mine reads 312mm(+ some, less then half a mm). hope it helps. Udi. |
|
| Author: | Alexandru Marian [ Sun Apr 20, 2008 3:36 pm ] |
| Post subject: | Re: Question for those that have the SE 114 Torres plan... |
Thanks a LOT!! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|