| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| GAL Harp Guitar Plans http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=16934 |
Page 1 of 1 |
| Author: | Mike OMelia [ Sun Apr 20, 2008 10:11 pm ] |
| Post subject: | GAL Harp Guitar Plans |
So I am sitting here looking at my Harp Guitar plans and it occurs to me that there are no indications of side thickness. Anybody have any experience here? Mike |
|
| Author: | Bruce Dickey [ Mon Apr 21, 2008 9:51 am ] |
| Post subject: | Re: GAL Harp Guitar Plans |
Why would they be any different than a regular guitar? These things are big, but based on a normal guitar otherwise. .080 to .090 inches thickness should be fine, no cutaway to worry about bending, should be a breeze. Pictures, don't forget, we enjoy vicarious building you know... |
|
| Author: | Dave White [ Mon Apr 21, 2008 9:59 am ] |
| Post subject: | Re: GAL Harp Guitar Plans |
Mike, I'd agree with Bruce. |
|
| Author: | Mike OMelia [ Mon Apr 21, 2008 10:28 am ] |
| Post subject: | Re: GAL Harp Guitar Plans |
Dave, Thanks. How did your build end up? Please post a final pic. Mike |
|
| Author: | Dave White [ Mon Apr 21, 2008 4:37 pm ] |
| Post subject: | Re: GAL Harp Guitar Plans |
slackkey_mike wrote: Dave, Thanks. How did your build end up? Please post a final pic. Mike Mike, Do you mean my harp guitar? I finished (and posted this) back in August last year but the build is documented here on my website. |
|
| Author: | Mike OMelia [ Mon Apr 21, 2008 4:47 pm ] |
| Post subject: | Re: GAL Harp Guitar Plans |
Ron, How does your binding jig work? Mike |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|