| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| searching archives for V-joint tutorial http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=17200 |
Page 1 of 1 |
| Author: | Robbie O'Brien [ Thu May 15, 2008 11:20 am ] |
| Post subject: | searching archives for V-joint tutorial |
On Jan, 23, 07 JFrench posted his excellent tutorial on making a v joint for classical necks. The title was V-joint tutorial revisited. Why can't I find it when doing a search in the archives? |
|
| Author: | Mike Mahar [ Thu May 15, 2008 2:10 pm ] |
| Post subject: | Re: searching archives for V-joint tutorial |
I don't know why the search isn't working but one of our members archives all tutorials. Look here: http://www.connor.net.au/olftutorial/ |
|
| Author: | Robbie O'Brien [ Thu May 15, 2008 2:26 pm ] |
| Post subject: | Re: searching archives for V-joint tutorial |
What a great resource! Thanks for the link Mike. And yes, the tutorial I was looking for was there. |
|
| Author: | Marc [ Thu May 15, 2008 2:39 pm ] |
| Post subject: | Re: searching archives for V-joint tutorial |
Robbie, coincidence you were looking for it, I was searching a couple of weeks ago because I wanted to try the v-joint on my next couple of guitars. I'm sure you found it by now. It's in the archives: http://luthiersforum.com/forum/viewtopic.php?f=10102&t=10511 I've finished two necks with v-joints from Joshua's tutorial. I'll post some pics when I get some. |
|
| Author: | WaddyThomson [ Thu May 15, 2008 2:44 pm ] |
| Post subject: | Re: searching archives for V-joint tutorial |
It's a great Tutorial. I used it too. It took me a lot of tweaking, but I finally got one to fit. |
|
| Author: | Robbie O'Brien [ Thu May 15, 2008 2:49 pm ] |
| Post subject: | Re: searching archives for V-joint tutorial |
Thanks for all the help guys. I have a student that wants to give it a try. |
|
| Author: | jfrench [ Thu May 15, 2008 6:10 pm ] |
| Post subject: | Re: searching archives for V-joint tutorial |
I'm really happy to know some people are trying this. At first is seemed like no one was going to... |
|
| Author: | WaddyThomson [ Thu May 15, 2008 6:23 pm ] |
| Post subject: | Re: searching archives for V-joint tutorial |
It is a daunting task to some of us. My final joint did not resemble the original cuts. It took too much tweaking. I have lots of excuses, none of them valid. It was all my fault.   Please ignore the marking error. It would have been covered up with the head plate. All moot now. I destroyed this neck cutting the side slots. ![[headinwall]](./images/smilies/headbangwalluf8.gif "Mad")
|
|
| Author: | DYeager [ Fri May 16, 2008 4:07 pm ] |
| Post subject: | Re: searching archives for V-joint tutorial |
I'd like to thank Bob Conner for the tutorial index. Thanks, Bob Dan |
|
| Author: | Steve Walden [ Fri May 16, 2008 10:29 pm ] |
| Post subject: | Re: searching archives for V-joint tutorial |
Waddy - Don't be shy about sharing your boo boo's!!!! We can all learn from them. Your Vee joint looked pretty good. It looks like you nailed the precision and fit. I'm sorry that the slot holes messed up. Could you fit another head plate to the Vee you already had cut? Hey maan! Your joint looks really good, man. Hey, we're not talkin about that kind of joint! 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|