| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Williams Binding Machine Question (Harp Guitar) http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=17523 |
Page 1 of 1 |
| Author: | Mike OMelia [ Sat Jun 07, 2008 7:19 pm ] |
| Post subject: | Williams Binding Machine Question (Harp Guitar) |
I am in the middle of cutting all the parts for the WBM. However, one of my projects will be the Dyer Harp Guitar (just got the mold for it cut today!) Does anyone know if there will be "reach" problems given the base design for the WBM? I need to make it all around the harp neck... Mike |
|
| Author: | Richard Wilson [ Sat Jun 07, 2008 9:31 pm ] |
| Post subject: | Re: Williams Binding Machine Question (Harp Guitar) |
Is the top/back flat on the harp component of the instrument? I've always assumed it was though I've never built or played one for myself. If that's the case you could do what you can with the jig and then do the rest by hand. |
|
| Author: | Mike OMelia [ Sat Jun 07, 2008 9:54 pm ] |
| Post subject: | Re: Williams Binding Machine Question (Harp Guitar) |
Yes, no bow to the harp neck. Both points are excellent points. Thank you. Mike |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|