Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Guitar Mold Sealing

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

Mike OMelia

Post subject: Guitar Mold Sealing

Posted: Sat Jun 07, 2008 7:23 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

What do you recomend for sealing a guitar mold? Same for the Fox Bender and the Williams Binding Machine.

Thank you!

Mike

Top

Hesh

Post subject: Re: Guitar Mold Sealing

Posted: Sat Jun 07, 2008 7:27 pm

Old Growth Brazilian Rosewood

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13387
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional

Mike my friend Zinnser Seal Coat (dewaxed) shellac works great for all three.

Top

bluescreek

Post subject: Re: Guitar Mold Sealing

Posted: Sat Jun 07, 2008 8:33 pm

Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4903
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional

I found that sealing the bending machine can cause some issues. The heat and finish doesn't get along very well
john
I use sanding sealer and lacquer on the molds but shellac will do well

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it

Top

Mike OMelia

Post subject: Re: Guitar Mold Sealing

Posted: Sat Jun 07, 2008 9:52 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

Thanks!

Mike

Top

Michael Dale Payne

Post subject: Re: Guitar Mold Sealing

Posted: Mon Jun 09, 2008 11:55 am

Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States

I am going to tell something I have recently completed doing to all my molds that I really like. Last year I had a run of glue down the side of a rim that was able to get between the mold and rim. I thought I had wiped up in time but missed the fact that it got between the rim and the mold and set up for several days. Well you can imagine the minor grief this caused. [headinwall]

So I have lined the interior of my molds with .005” UHMW tape from McMaster –Carr. It only makes a .010 change to the rim over all or .005” per side but I will not glue another rim to the mold

Top

Mike OMelia

Post subject: Re: Guitar Mold Sealing

Posted: Mon Jun 09, 2008 10:33 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

You mean the mold is SUPOSED to be taken off? gaah

Mike

Top

Page 1 of 1

[ 7 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: Bing [Bot] and 86 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: