| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| router mill plans ? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=17710 |
Page 1 of 1 |
| Author: | Jody [ Mon Jun 23, 2008 5:03 pm ] |
| Post subject: | router mill plans ? |
does anyone know of routermill plans . or another jig for slotting bridges. thanks Jody |
|
| Author: | Jody [ Mon Jun 23, 2008 6:48 pm ] |
| Post subject: | Re: router mill plans ? |
Thanks Todd. Jody |
|
| Author: | JJ Donohue [ Mon Jun 23, 2008 6:52 pm ] |
| Post subject: | Re: router mill plans ? |
Check out John How's bridge shaping, slotting and drilling jig in the tools and technique section...http://luthiersforum.3element.com/pages/jig_tools_tech/john_hows_bridge_jig.htm I made my own inspired by John's jig and it has worked flawlessly for years. |
|
| Author: | Jody [ Mon Jun 23, 2008 7:01 pm ] |
| Post subject: | Re: router mill plans ? |
Thanks JJ it looks rather simple ... perfect for me ! LOL Jody |
|
| Author: | Louis Freilicher [ Mon Jun 23, 2008 8:27 pm ] |
| Post subject: | Re: router mill plans ? |
Insperation for my mill came from Frank Ford. http://www.frets.com/FRETSPages/Luthier/Technique/ToolMaking/BridgeMill/bridgemill01.html Louis |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|