| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Taylor Plans? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=17716 |
Page 1 of 1 |
| Author: | Michael Jin [ Mon Jun 23, 2008 9:42 pm ] |
| Post subject: | Taylor Plans? |
Obviously there are many comparisons in plans to Martin models, but I was wondering if anyone knew where I could acquire some plans for a guitar that resembles a Taylor 314-CE. I'm particularly interested in that one because it's one of my favorite factory guitars and I absolutely love the comfort of the design in my hands. At any rate, any information would be greatly appreciated. Thanks once again. ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
|
|
| Author: | Kathy Matsushita [ Tue Jun 24, 2008 1:49 am ] |
| Post subject: | Re: Taylor Plans? |
Michael: When I was looking for plans to make a Taylor 12 style, what I ended up doing was to go to the Taylor website, drag a JPG photo (tiny) of their bracing scheme from this page: http://www.taylorguitars.com/guitars/features/bracing/Types.aspx, and then copy the specs from the "Show complete specs" pull-down menu on the Taylor 12 model page. (Here's the page for your 314ce model: http://www.taylorguitars.com/Guitars/Acoustic-Electric/300/314ce/) What I did with the tiny JPG photo was enlarge it to a full page size, then draw a grid over it so I could then make a full-size plan. The complete specs list gave me a few other measurements to go by. I also went to a local guitar store and asked them if I could trace the body shape of a Taylor, so I could figure out the cutaway shape, especially. It was a bit of work to do all this, but it worked out okay. You can see how mine turned out on this page: http://home.comcast.net/~kathymatsushita/Projects/htmlpages/tc1.html Oh, yeah....also, John Hall of Blues Creek Guitars has molds for Taylor size guitars. Hope this helps. Kathy Matsushita |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|