Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Rough sides too thin?

Page 1 of 1

[ 6 posts ]

Print view

Previous topic | Next topic

Author

Message

Blain

Post subject: Rough sides too thin?

Posted: Thu Jun 26, 2008 5:17 pm

Koa

Joined: Sun Jan 07, 2007 1:14 pm
Posts: 761
First name: Blain
City: Leander
State: Texas
Country: United States
Focus: Build

I just got a set of Ancient Kauri and one of the sides has an area in the middle that measures out to .073 thick.

I'm worried that since it still needs a lot of sanding, if this is something that I should request a replacement be sent.

Or is it nothing to worry about?

_________________
Thanks,
Blain

http://www.ullrichguitar.com

"89.67% of all statistics are made up on the spot."

Top

StevenWheeler

Post subject: Re: Rough sides too thin?

Posted: Thu Jun 26, 2008 5:27 pm

Contributing Member

Joined: Sat Feb 02, 2008 4:01 pm
Posts: 1104
Location: Winfield, IL.

I would send it back. In fact I'd send both back so you wind up with a good matching set.

Steve

Top

Cal Maier

Post subject: Re: Rough sides too thin?

Posted: Thu Jun 26, 2008 5:29 pm

Cocobolo

Joined: Fri Apr 13, 2007 12:52 am
Posts: 288
Location: Canada
First name: Cal
Last Name: Maier
City: Crossfield
State: AB
Country: Canada
Focus: Build
Status: Professional

Blaine,

I'd be asking for a new set. That doesn't leave much material for finishing. The other option is to laminate the sides, I guess, but that is something that I've never attempted yet.

Cal

_________________
Remember, there are no stupid questions, only stupid answers!

Top

Hesh

Post subject: Re: Rough sides too thin?

Posted: Thu Jun 26, 2008 8:41 pm

Old Growth Brazilian Rosewood

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13387
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional

Yep the guys are correct IMHO - finish sanding will take off another .003 or more leaving you with some ancient toilet paper......

Top

Blain

Post subject: Re: Rough sides too thin?

Posted: Thu Jun 26, 2008 9:21 pm

Koa

Joined: Sun Jan 07, 2007 1:14 pm
Posts: 761
First name: Blain
City: Leander
State: Texas
Country: United States
Focus: Build

Thanks guys.

I've contacted the seller and am going to have the set replaced. And to think that the other side was so thick that it could have almost been resawed to produce yet another side.

Man, and I even tried to lay my profile template up to it to see if that spot could be avoided but it covered about a 2.0"+ x 2.0" area that some of it could not be avoided.

_________________
Thanks,
Blain

http://www.ullrichguitar.com

"89.67% of all statistics are made up on the spot."

Top

Frei

Post subject: Re: Rough sides too thin?

Posted: Sat Jun 28, 2008 12:54 pm

Koa

Joined: Wed Jan 30, 2008 11:16 pm
Posts: 718

Must have been a Monday set, or a 'bring your favorite beer to work day'. Those Kiwi's :roll:

_________________
Here is what a Parlor Guitar is for!
http://www.youtube.com/watch?v=oEa8PkjO6_I

Top

Page 1 of 1

[ 6 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: Bing [Bot], Glen H and 34 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: