| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| double action rods? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=17855 |
Page 1 of 1 |
| Author: | Jody [ Thu Jul 03, 2008 4:27 pm ] |
| Post subject: | double action rods? |
Can someone give me a supplier or part number for a double action rod that is compatable with the martin truss rod slot ? thanks Jody |
|
| Author: | Hesh [ Thu Jul 03, 2008 5:57 pm ] |
| Post subject: | Re: double action rods? |
Jody here is a link to LMI's Martin style 2-way rod http://www.lmii.com/CartTwo/thirdproducts.asp?CategoryName=Truss+Rods%2FNeck+Parts&NameProdHeader=Truss+Rod+%2D+Martin%99+Style+Truss+Rod |
|
| Author: | Chas Freeborn [ Thu Jul 03, 2008 6:30 pm ] |
| Post subject: | Re: double action rods? |
or: http://www.alliedlutherie.com/truss_rods.htm -C edit- oops, you want Martin style - my bad... |
|
| Author: | Flori F. [ Thu Jul 03, 2008 6:46 pm ] |
| Post subject: | Re: double action rods? |
You can also order one from Martin. https://www.martinguitar.com/1833/catal ... ar%20Parts I ordered one. It's lighter than the LMI version. |
|
| Author: | Jody [ Thu Jul 03, 2008 7:07 pm ] |
| Post subject: | Re: double action rods? |
Cool , thanks guys , I just got a rod from lmi , but its alot thinner, I guess I should have been more specific on the phone , thanks again! Jody |
|
| Author: | Jody [ Mon Jul 07, 2008 6:10 pm ] |
| Post subject: | Re: double action rods? |
Thanks Todd, I think I like the idea of a narrower rod , two maple or oak shims glued in there at .080 , should serve to stiffen the neck a bit also . Jody |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|