| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Where to get sanding disks? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=17897 |
Page 1 of 1 |
| Author: | John Elshaw [ Sun Jul 06, 2008 3:16 pm ] |
| Post subject: | Where to get sanding disks? |
Hi everybody, I'm looking for a place to buy sandpaper disks in 800, 1000, 1500, and 2000 grit. Has anybody seen a place that sells disks (preferably hook and loop) at anything higher than 220 grit? I know I can get micro-mesh but am wondering if there is a place to get regular sanding disks? Also, does micro-mesh and regular wet/dry paper match grit for grit (i.e. 2000 grit micromesh = 2000 grit wet/dry)? Thanks! John |
|
| Author: | Mattia Valente [ Sun Jul 06, 2008 3:31 pm ] |
| Post subject: | Re: Where to get sanding disks? |
Try Supergrit.com - I've gotten Abralon materials from them before. Otherwise hit up an automotive supply places for abrasives, as they'll have the finer grit stuff. Personally, I'm using 3M sheets for hand/block sanding and Festool and Abralon papers/disks for powered finish sanding. |
|
| Author: | Mike OMelia [ Sun Jul 06, 2008 11:53 pm ] |
| Post subject: | Re: Where to get sanding disks? |
Crap, beat me to it. http://www.supergrit.com/ I just found a sanding belt here I could locate nowhere else. Mike (lots of likewise thnking here!) |
|
| Author: | John Elshaw [ Mon Jul 07, 2008 9:27 am ] |
| Post subject: | Re: Where to get sanding disks? |
Thanks fellas, I just ordered a bunch of H & L disks! |
|
| Author: | Chris Paulick [ Wed Jul 09, 2008 9:59 pm ] |
| Post subject: | Re: Where to get sanding disks? |
Also Klingspor's www.woodworkingshop.com |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|