yes
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Urgent! Need advice http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=17933 |
Page 1 of 1 |
| Author: | Mike OMelia [ Wed Jul 09, 2008 1:56 pm ] |
| Post subject: | Urgent! Need advice |
Found a brand new Jet 10-20 drum sander for $450 + $60 shipping. Is this a deal? |
|
| Author: | Hesh [ Wed Jul 09, 2008 1:57 pm ] |
| Post subject: | Re: Urgent! Need advice |
yes
|
|
| Author: | Mike OMelia [ Wed Jul 09, 2008 1:59 pm ] |
| Post subject: | Re: Urgent! Need advice |
Pull the trigger? |
|
| Author: | Michael Dale Payne [ Wed Jul 09, 2008 2:00 pm ] |
| Post subject: | Re: Urgent! Need advice |
JUST DO IT 
|
|
| Author: | Mike OMelia [ Wed Jul 09, 2008 2:03 pm ] |
| Post subject: | Re: Urgent! Need advice |
Done. |
|
| Author: | Mike OMelia [ Wed Jul 09, 2008 2:12 pm ] |
| Post subject: | Re: Urgent! Need advice |
Well, at that price, I could not build one for much less. My cost for motors, wood, parts was getting close to $350. |
|
| Author: | Glenn LaSalle [ Wed Jul 09, 2008 2:24 pm ] |
| Post subject: | Re: Urgent! Need advice |
I am also looking for a 10-20. At that price I would have jumped as well. If there are any more avaialbele, please let me know! Thx! Glenn |
|
| Author: | Mike OMelia [ Wed Jul 09, 2008 2:29 pm ] |
| Post subject: | Re: Urgent! Need advice |
Ebay. http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0259402615 Thats the one I bought. It would not surprise me if they had more...contact them via their store. Good luck! Mike Edit: They do not show anymore, but that does not mean anything. Contact them |
|
| Author: | Hesh [ Wed Jul 09, 2008 2:30 pm ] |
| Post subject: | Re: Urgent! Need advice |
No WAIT!!!!! Just kidding..... Congrats Mike! ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
|
|
| Author: | Mike OMelia [ Wed Jul 09, 2008 2:36 pm ] |
| Post subject: | Re: Urgent! Need advice |
You better be kidding!   I have been watching ebay and craigslist for sometime. I will bet anything that the seller got these tools from liquidation.com. I watch that site too. You see some crazy deals every now and again at liquidation.com. But you can end up with a mixed bag of stuff. 10 table saws, etc and a box of barbie dolls. We should all watch liquidation.com and when a deal like a lot of table saws or drill presses comes up, we can do a group purchase. Mike |
|
| Author: | Mike OMelia [ Wed Jul 09, 2008 3:14 pm ] |
| Post subject: | Re: Urgent! Need advice |
Turns out they have more... |
|
| Author: | Hesh [ Wed Jul 09, 2008 4:14 pm ] |
| Post subject: | Re: Urgent! Need advice |
slackkey_mike wrote: Turns out they have more... Yeah they stock up this time of year prior to the 50% off sale that they always run starting July 15th....... Sorry - couldn't resist..... You paid about $100 less than I paid for my 10-20 3 years ago - good job!
|
|
| Author: | Mike OMelia [ Wed Jul 09, 2008 4:23 pm ] |
| Post subject: | Re: Urgent! Need advice |
Well, Glenn needs to look again. One more listed. If I drive up, I save the shipping... but gas is so high, not sure its worth it, unless I buy that Jet table saw... have you seen it? I do not need much... so it looks more than adequate..http://stores.ebay.com/General-Industrial-Supply Mike |
|
| Author: | Mike OMelia [ Wed Jul 09, 2008 4:31 pm ] |
| Post subject: | Re: Urgent! Need advice |
Glenn, use the number I PMd to you to call them. Someone already bid ($1) on the one that is listed again. Maybe thats you?? But, if you are in a hurry, they have plenty. And will sell at $450. Mike |
|
| Author: | Glenn LaSalle [ Wed Jul 09, 2008 5:18 pm ] |
| Post subject: | Re: Urgent! Need advice |
I just saw the PM, and tried calling (6:15 EDT) - nobody picked up (maybe they are closed). I am in Las Vegas on a business trip, so I had limited access to OLF ... I'll call first thing tomorrow morning - hopefully I can grab one a that price  Thanks, Mike, for the heads up!!! Glenn |
|
| Author: | Mike OMelia [ Wed Jul 09, 2008 5:23 pm ] |
| Post subject: | Re: Urgent! Need advice |
Glenn, they close at 4:30 CST... sorry. Yeah, call in the morning and let me know! Mike |
|
| Author: | Glenn LaSalle [ Thu Jul 10, 2008 8:26 am ] |
| Post subject: | Re: Urgent! Need advice |
Thanks Mike!!! I called Tom this morning and got one for $450 as well!! He is going to ship it out today as well - great price and great service! Glenn |
|
| Author: | Mike OMelia [ Fri Jul 11, 2008 5:13 pm ] |
| Post subject: | Re: Urgent! Need advice |
OK all you drum sander owners. I'm thinking supergrit.com for sanding rolls. What grit to use for thicknessing? Do I need more than one grit for thickness? If you know of a place that has a better deal on paper, please let me know. Thanks, mike |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|