Here's my new favorite tool. An adjustable air gun. Can easily do just a trickle of air or the full monty. Rubber tip won't damage wood if you hit it. My old one was difficult to regulate as far as air pressure. Got it at NAPA. I love it.
Terry
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| More Cool/Useful Tools http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=17974 |
Page 1 of 1 |
| Author: | Mike Collins [ Sat Jul 12, 2008 6:30 pm ] |
| Post subject: | Re: More Cool/Useful Tools |
Todd; how bout binding & purf. thickness? Veneers-fretwire-pickguards etc..... Mc |
|
| Author: | Steve Saville [ Sat Jul 12, 2008 6:58 pm ] |
| Post subject: | Re: More Cool/Useful Tools |
I'd rather use calipers, digital or dial. Those thickness gages are a little tricky. If it is not perpendicular, you'll get erroneous results. I've used both a lot and I'm good with them. That's my preference. --YMMV |
|
| Author: | Pat Foster [ Sat Jul 12, 2008 11:40 pm ] |
| Post subject: | Re: More Cool/Useful Tools |
verhoevenc wrote: Kinda wish that that had a bigger throat on it.... Chris Chris, A few minutes on a bandsaw and some scrap wood, you could make it into this: |
|
| Author: | Terence Kennedy [ Sun Jul 13, 2008 8:44 pm ] |
| Post subject: | Re: More Cool/Useful Tools |
Here's my new favorite tool. An adjustable air gun. Can easily do just a trickle of air or the full monty. Rubber tip won't damage wood if you hit it. My old one was difficult to regulate as far as air pressure. Got it at NAPA. I love it. Terry
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|