| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| canadian custom finishing??? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=18073 |
Page 1 of 1 |
| Author: | phil [ Tue Jul 22, 2008 10:57 am ] |
| Post subject: | canadian custom finishing??? |
quite a while ago there was a suggestion made that a canadian was soon going to be getting into finishing guitars for others. for those of you in the know, is there any update on that? any leads would be much appreciated. phil |
|
| Author: | Bob Garrish [ Tue Jul 22, 2008 9:50 pm ] |
| Post subject: | Re: canadian custom finishing??? |
I had mentioned Mike Collins was looking at it. I haven't been able to get in touch with him for a few weeks, so I'm a little worried about what's going on over there, but if you can get in touch with him he should be able to do a UV finish for you. http://www.collinsguitar.com/ |
|
| Author: | phil [ Tue Jul 22, 2008 10:45 pm ] |
| Post subject: | Re: canadian custom finishing??? |
thanks for the lead bob. i've sent an email. i'll let you and the other canucks know when i know. phil |
|
| Author: | Greg [ Tue Jul 22, 2008 11:03 pm ] |
| Post subject: | Re: canadian custom finishing??? |
Great! |
|
| Author: | phil [ Wed Jul 23, 2008 8:38 am ] |
| Post subject: | Re: canadian custom finishing??? |
i tried to send an email yesterday and had it bounce back. on the web site there's not even an indication of where the business is located. tough to get a phone number that way. bob, any other leads on how to get a hold of collins guitars? phil |
|
| Author: | Dave Stewart [ Wed Jul 23, 2008 9:03 am ] |
| Post subject: | Re: canadian custom finishing??? |
His profile indicates he's in Sutton. Username collinsguitar - PM him. (I also see his website contact is "ed@...", not michael.) |
|
| Author: | Bob Garrish [ Wed Jul 23, 2008 9:23 am ] |
| Post subject: | Re: canadian custom finishing??? |
He's in Keswick, actually. And I'll let you know if I figure anything out, I'm worried about him as well. |
|
| Author: | collinsguitar [ Fri Jul 25, 2008 5:34 pm ] |
| Post subject: | Re: canadian custom finishing??? |
Hi Folks, I am currently in the middle of finishing up my new shop(and new booth) and getting ready to get back in the swing of things. I have also corrected the contact info on my website.  I may put phone contact info there as well as soon as I am ready to start taking instruments. I am hoping to be operational in about three weeks. Please contact me for pricing. Michael http://www.collinsguitar.com p.s. Nice tuner buttons Bob! |
|
| Author: | TonyKarol [ Fri Jul 25, 2008 8:49 pm ] |
| Post subject: | Re: canadian custom finishing??? |
Good to hear from you Mike ..hope all is well, and I need to make it up for visit sometime soon !!! |
|
| Author: | collinsguitar [ Tue Jul 29, 2008 6:52 am ] |
| Post subject: | Re: canadian custom finishing??? |
Hey Tony! You are more than welcome to swing by as soon as the shop is up and running. M |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|