Unfortunately I'm not sure either
But I also use the 400 grit to 1000, 2000 platin, and I had success with that buffing by hand.
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Festool paper http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=18171 |
Page 1 of 1 |
| Author: | TonyFrancis [ Tue Jul 29, 2008 7:29 pm ] |
| Post subject: | Festool paper |
- |
|
| Author: | Hesh [ Tue Jul 29, 2008 7:57 pm ] |
| Post subject: | Re: Festool paper |
Tony buddy I think that James encountered this very question and possibly can help here. I have the ES-125 and CT-22 but don't use mine for finish sanding. |
|
| Author: | bob_connor [ Tue Jul 29, 2008 8:31 pm ] |
| Post subject: | Re: Festool paper |
G'day Tony I've been using the ES-125 for finishing. I don't know what the p and s scales are but I use 1) the standard 400 grit paper for level sanding. 2) 500 platin to take out any swirls left by the 400 grit 3) 1000 grit platin 4) 2000 grit platin 5) fine Menzerna I feel the 4-500 platin has too much give in it for successful leveling. I have tried it but wasn't too happy with the result. Bob |
|
| Author: | James Orr [ Tue Jul 29, 2008 9:19 pm ] |
| Post subject: | Re: Festool paper |
Unfortunately I'm not sure either But I also use the 400 grit to 1000, 2000 platin, and I had success with that buffing by hand.
|
|
| Author: | Chris Ide [ Tue Jul 29, 2008 9:32 pm ] |
| Post subject: | Re: Festool paper |
This is some info on festool abrasives from my reps site http://www.bobmarinosbesttools.com/docs/abrasives.pdf |
|
| Author: | TonyFrancis [ Wed Jul 30, 2008 8:33 pm ] |
| Post subject: | Re: Festool paper |
- |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|