Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Vacuum Bags - What kind are you using
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=18240		 Page 1 of 1
Author:  GregG [ Sun Aug 03, 2008 5:59 pm ]
Post subject:  Vacuum Bags - What kind are you using
Hello,

I was hoping to get some suggestions on vacuum bags for different clamping operations, are you using vinyl or poly bags and where did you get them. I've found a few that look good just looking for thoughts from experienced users.

Thanks,
Greg
Author:  Brock Poling [ Sun Aug 03, 2008 6:18 pm ]
Post subject:  Re: Vacuum Bags - What kind are you using
GregG wrote:
Hello,

I was hoping to get some suggestions on vacuum bags for different clamping operations, are you using vinyl or poly bags and where did you get them. I've found a few that look good just looking for thoughts from experienced users.

Thanks,
Greg


I am using the duramax elite bags from VeneerSupplies. I really like them.
Author:  peterm [ Sun Aug 03, 2008 7:00 pm ]
Post subject:  Re: Vacuum Bags - What kind are you using
Brock Poling wrote:
GregG wrote:
Hello,

I was hoping to get some suggestions on vacuum bags for different clamping operations, are you using vinyl or poly bags and where did you get them. I've found a few that look good just looking for thoughts from experienced users.

Thanks,
Greg


I am using the duramax elite bags from VeneerSupplies. I really like them.




same here. Great stuff.
Author:  GregG [ Sun Aug 03, 2008 7:59 pm ]
Post subject:  Re: Vacuum Bags - What kind are you using
Thanks Guys!

Greg
Author:  Bob Garrish [ Sun Aug 03, 2008 10:48 pm ]
Post subject:  Re: Vacuum Bags - What kind are you using
I heat welded a vinyl shower curtain for my big bag and I use garbage bags for smaller stuff. It's sort of ghetto but it's always worked so I haven't taken the time to get a 'real' one idunno
Author:  Larry Davis [ Mon Aug 04, 2008 10:02 am ]
Post subject:  Re: Vacuum Bags - What kind are you using
For a new "retirement" hobby I'm setting up to saw thick amboyna and thuya burl veneers and apply to Russian plywood for high end table and furniture stuff. These guys have been great to work with on vacuum presses, bags and clamps. They sent a personalized letter when I requested their catalog.

http://www.vacupress.com/vacuumveneering.htm
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/