| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Update on my 10-20 Performax Sander http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=18242 |
Page 1 of 1 |
| Author: | Mike OMelia [ Sun Aug 03, 2008 7:33 pm ] |
| Post subject: | Update on my 10-20 Performax Sander |
I finally got it all hooked up and adjusted. Hooked the Delta dust collector to it. Sucks like a dream. Airflow around drum is great. I tested quite a bit then finally put a piece of curly maple through it to use as a tail piece (nice wood zootman) Worked great! Very happy with this thickness sander. Mike |
|
| Author: | Heath Blair [ Sun Aug 03, 2008 11:20 pm ] |
| Post subject: | Re: Update on my 10-20 Performax Sander |
glad to hear it is working out for you. i agree, no problems with mine either. its actually one of my favorite tools in my shop. have fun. |
|
| Author: | Mike OMelia [ Sun Aug 03, 2008 11:50 pm ] |
| Post subject: | Re: Update on my 10-20 Performax Sander |
Did you just get one? Mike |
|
| Author: | Glenn LaSalle [ Mon Aug 04, 2008 7:22 am ] |
| Post subject: | Re: Update on my 10-20 Performax Sander |
I also set-up mine and thicknessed a rosette and a couple of tops. MIne was out of alignment (drum was too high towards end). I had a heck of a time getting it to align. I think I am close now- looks like the end is a few thousandths higher (which causes the tops to be slightly thicker in the middle). I have mine connected to my Festool CT-22 Dust extractor and am very pleased with the results. Mike, are you using the paper that came with the 10-20, or did you put on something different? Glenn |
|
| Author: | Mike OMelia [ Mon Aug 04, 2008 12:56 pm ] |
| Post subject: | Re: Update on my 10-20 Performax Sander |
Well, as you know, I destroyed the conveyor belt... bought new one from klinspor ($19) and while there I bought a roll of 80 grit... but still using the paper that came with it. Also, while at klingspor, I bought one of those giant erasers (2"x2"x12", $7-$9). Cleans the paper great! Mike |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|