| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Switching to Nitro http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=18481 |
Page 1 of 1 |
| Author: | RaymundH [ Thu Aug 21, 2008 8:49 am ] |
| Post subject: | Switching to Nitro |
Hello, I have finished my last few with water based finishes (KTM 9) after pore filling with Z-Poxy with pretty good results. I now have access to a proper spray booth and intend to use nitro for my present project. Can I apply my Z-Poxy with my usual process then shoot nitro directly over it as I did with my water base product? Thank you for your opinions, Ray |
|
| Author: | elysne [ Thu Aug 21, 2008 10:23 am ] |
| Post subject: | Re: Switching to Nitro |
I shoot Nitro over epoxy all the time. I use System 3 epoxy. I do sand the epoxy coat flat before the Nitro. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|