| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Jig to use while tightening threaded tuner bushings? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=18500 |
Page 1 of 1 |
| Author: | Pat Foster [ Fri Aug 22, 2008 9:06 pm ] |
| Post subject: | Jig to use while tightening threaded tuner bushings? |
Was there a thread here on the OLF about a jig to hold tuner button shafts perpendicular to the sides of the headstock while tightening threaded tuner bushings? It would keep the tuners from turning while running the bushings down snug. TIA, Pat |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|