| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Drum sander conversion H&L accuracy http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=18582 |
Page 1 of 1 |
| Author: | Michael Dale Payne [ Fri Aug 29, 2008 3:41 pm ] |
| Post subject: | Drum sander conversion H&L accuracy |
I have a couple of question for those of you that have converted their drum sanders to hook and loop. 1. Are you are still locking the paper ends in the spring clamps? (I would assume so) 2. have any of you had any accuracy variance due to the springiness of the hook and loop connection? I have had the stuff to convert for a while but was not out of cloth backed roll till now. I find my self a bit shy to pull the trigger. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|