| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Filling after finishing http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=18882 |
Page 1 of 1 |
| Author: | James W B [ Sun Sep 21, 2008 7:02 pm ] |
| Post subject: | Filling after finishing |
After shooting several coats of Nitro,I noticed a couple of very small holes in the Rosette, probably a couple of stray pores.I`m not sure I could even get a decent picture they are so small.Is it possible to fill these with CA,and if so should I wait until the Nitro cures? Or maybe I should try and drop fill with Nitro now and let it cure before rubbing out? Suggestions please. James W B |
|
| Author: | James W B [ Sun Sep 21, 2008 8:54 pm ] |
| Post subject: | Re: Filling after finishing |
Thanks Todd, James |
|
| Author: | Robbie O'Brien [ Sun Sep 21, 2008 11:18 pm ] |
| Post subject: | Re: Filling after finishing |
What Todd said. For some reason CA tends to be visible under a nitro finish but works well as a filler for cat urethane. |
|
| Author: | TonyKarol [ Mon Sep 22, 2008 10:54 am ] |
| Post subject: | Re: Filling after finishing |
My reason ... CA is too hard to use as a drop fill, its like a rock, then the nitro around it shrinks leaving witness lines, no matter how flat you have it sanded. its fine as a fill under the finish, or if you need to quickly fill something on the first coat, and then sand it back. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|