Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Filling after finishing

Page 1 of 1

[ 5 posts ]

Print view

Previous topic | Next topic

Author

Message

James W B

Post subject: Filling after finishing

Posted: Sun Sep 21, 2008 7:02 pm

Koa

Joined: Sat Jul 01, 2006 5:55 am
Posts: 1392
Location: United States
First name: James
Last Name: Bolan
City: Nashville
State: Tennessee
Country: USA

After shooting several coats of Nitro,I noticed a couple of very small holes in the Rosette, probably a couple of stray pores.I`m not sure I could even get a decent picture they are so small.Is it possible to fill these with CA,and if so should I wait until the Nitro cures? Or maybe I should try and drop fill with Nitro now and let it cure before rubbing out? Suggestions please.
James W B

_________________
James W Bolan
Nashville Tennessee

Top

James W B

Post subject: Re: Filling after finishing

Posted: Sun Sep 21, 2008 8:54 pm

Koa

Joined: Sat Jul 01, 2006 5:55 am
Posts: 1392
Location: United States
First name: James
Last Name: Bolan
City: Nashville
State: Tennessee
Country: USA

Thanks Todd,
James

_________________
James W Bolan
Nashville Tennessee

Top

Robbie O'Brien

Post subject: Re: Filling after finishing

Posted: Sun Sep 21, 2008 11:18 pm

Brazilian Rosewood

Joined: Wed Jan 19, 2005 5:23 am
Posts: 2357
Location: United States

What Todd said. For some reason CA tends to be visible under a nitro finish but works well as a filler for cat urethane.

Top

TonyKarol

Post subject: Re: Filling after finishing

Posted: Mon Sep 22, 2008 10:54 am

Contributing Member

Joined: Fri Sep 09, 2005 7:51 am
Posts: 3786
Location: Canada

My reason ... CA is too hard to use as a drop fill, its like a rock, then the nitro around it shrinks leaving witness lines, no matter how flat you have it sanded. its fine as a fill under the finish, or if you need to quickly fill something on the first coat, and then sand it back.

_________________
Tony Karol
www.karol-guitars.com
"let my passion .. fulfill yours"

Top

Page 1 of 1

[ 5 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: gregorio, patmguitars, rbuddy and 12 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: