| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Making a side pattern http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=18972 |
Page 1 of 1 |
| Author: | Mark Ewing [ Sun Sep 28, 2008 6:25 pm ] |
| Post subject: | Making a side pattern |
Does anyone recall a TUT one of our fellow luthiers did on making a pattern for sides? I thought I saw it on the forum put I can't find it again. |
|
| Author: | ChuckH [ Sun Sep 28, 2008 6:54 pm ] |
| Post subject: | Re: Making a side pattern |
Howdy Mark, Here is a link to the OLF Tutorial Page. I think what you are looking for will be in the Molds section on that page. Happy reading! |
|
| Author: | Mark Ewing [ Sun Sep 28, 2008 8:42 pm ] |
| Post subject: | Re: Making a side pattern |
Thanks Chuck. It was in the section on sides. Go figure. BTW is there a preferred sequence for contouring the sides: before or after they are bent? |
|
| Author: | Rod True [ Mon Sep 29, 2008 1:24 am ] |
| Post subject: | Re: Making a side pattern |
I'd say it's easier to contour the sides before they are bend, you just have to make sure you bend them based on the right alignment mark (most use the waist location) and you have to bend a right hand side and a left hand side. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|