| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Source for ABS laminated sheets http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=18997 |
Page 1 of 1 |
| Author: | npalen [ Tue Sep 30, 2008 8:19 pm ] |
| Post subject: | Source for ABS laminated sheets |
Wondering about sources of laminated sheets for cutting purflin strips. I've had to reject some from my current supplier due to delamination. I've been buying these ABS sheets in approx. 2'x4' size and anywhere from .040 (B/W) up to .080 thickness. Thanks guys. |
|
| Author: | Howard Klepper [ Wed Oct 01, 2008 6:00 am ] |
| Post subject: | Re: Source for ABS laminated sheets |
Try Leathertone. They make laminated sheets for engraved signs. |
|
| Author: | Brad Goodman [ Wed Oct 01, 2008 7:52 am ] |
| Post subject: | Re: Source for ABS laminated sheets |
Hi Nelson, I have always used Leathertone also,however I had a small delamination problem on my last batch. |
|
| Author: | JRE Productions [ Wed Oct 01, 2008 10:12 am ] |
| Post subject: | Re: Source for ABS laminated sheets |
Leathertone was my first thought too. They can give you any color combination in .010 incriments. |
|
| Author: | npalen [ Wed Oct 01, 2008 11:10 am ] |
| Post subject: | Re: Source for ABS laminated sheets |
I've always used Leathertone also but sometimes get a little concerned with having just one source. The delamination problem was hopefully a one timer due to not quite enough heat in the process. I've had good service from Leathertone over the years. They are good people. Nelson |
|
| Author: | Pat Hawley [ Fri Oct 03, 2008 8:43 pm ] |
| Post subject: | Re: Source for ABS laminated sheets |
Sorry I'm coming in late on this - I was away for a couple of days. This is new to me. Can someone tell me a little more about using ABS sheets for purfling? Thanks, Pat |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|